Zhongnuojixieyouxiangongsi

Member Level: Register Member
Enterprise Nature: Personal company
Operation Mode: Fabricators
Location: Zhucheng City Weifang City Shandong Province China
Authentication Information:

Product Category

Product Details

Multifunctional sterilizer automatic sterilizer glass bottle sterilization

Price 10.00
Unit
Yield 1000/年
Place of Production 山东省诸城市
Product Category 其他
Delivery Time 30天

Product Detail Parameters

700 700*1200 900 900*1800
1000 1000*2200 1200 1200*3600

Product Description

Sterilization pot is a kind of equipment that can sterilize the bacteria in food without adding preservatives, and it is also a kind of equipment that can be customized according to the requirements of customers. There are three sterilization methods of sterilization pot: steam sterilization, water bath sterilization and spray sterilization. The sterilization method can be selected according to the characteristics of products and different packaging methods. Some customers have diversified products, such as vacuum packaging, bowl packaging, tinplate packaging, glass bottle packaging, etc., so how to choose sterilization pot? The multifunctional sterilizer is a sterilizer integrating steam sterilization, water bath sterilization and spray sterilization. Each sterilization method can be realized. It is suitable for manufacturers with multiple product types and packaging methods
When using the full-automatic sterilizer, it is necessary to pay attention to its operating procedures to ensure the normal operation and service life of the equipment:
1. In order to avoid the propagation of microorganisms, the time between sealing and sterilization of the product shall not exceed the rated time.
2. Before sterilization, the operator shall check whether the initial temperature conforms to the temperature of sterilization process specification. If it meets the requirements, it is normal to sterilize; otherwise, if it does not meet the requirements, it is necessary to heat the product to the specified temperature first, and then conduct sterilization after preheating for a certain time.
3. When sterilizing, avoid the confusion between sterilized and non sterilized products.
4. In the process of sterilization, in case of power failure, steam shutdown or other accidents, the sterilization can be suspended and handled in time. After the accident is solved, continue to sterilize or cool down to sterilize again according to the deviation correction procedure.
5. During the whole sterilization process, the sterilization operator shall operate in strict accordance with the sterilization process procedures, and carefully observe whether the temperature on the thermometer, automatic recorder and control screen is the same.
6. The sterilized can shall be cooled to 30 ℃ in the tank and then cooled naturally. The workshop water is ozone disinfection water without adding chlorine.
7. After sterilization, the product shall be put into the standing room after recording, and the standing time shall not be less than the rated value
The sterilizer is equipped with safety valve, pressure gauge, thermometer and other accessories to keep it safe, complete, sensitive and reliable. Maintenance and regular calibration shall be added during use. The starting pressure of the safety valve of the equipment is equal to the design pressure, which shall be sensitive and reliable, and shall be prevented from being adjusted at will. The accuracy grade of pressure gauge and thermometer is 1.5, and the difference within tolerance is normal. The pressure gauge without lead seal shall not be used, the indication of the pressure gauge fails, the scale is unclear, the dial plate is broken, the pointer does not return to zero position after pressure relief, and the lead seal is damaged, etc. shall be replaced immediately. The thermometer shall be inspected regularly. Before use, it shall be calibrated with a standard thermometer. After that, it shall be calibrated once a year. The sterilizer shall be inspected regularly. At least one external inspection shall be conducted every half a year. At least one inspection shall be conducted every year. The preparation work and inspection items before inspection shall be carried out in accordance with the "procedures" and relevant regulations. The inspection report shall be filed for record
_Process-equips

_Process-equips