Nanjing Sino German environmental protection equipment manufacturing Co., Ltd.
Address: Nanjing City Jinniu Lake District Liuhe Street Community Shuangqiao Xinguang Road No. 115
Contact: Xu Min (Manager) 18913960189
Fax: 025-57530868
Mailbox: njxm668@163.com
Q:1215040622 Q
QSB type deepwater automatic inhale submerged jet aerator jet use
QSB type deepwater automatic inhale submerged jet aerator by the submersible pump the water flow through the nozzle to form high speed flow, negative pressure suction air formed around the nozzle and the mixing chamber is mixed with water, produce gas mixture flow in the diffusion horn tube, high speed jet out many bubbles entrained flow in the larger area and depth in the waters of the vortex mixing, complete aeration, change and change the shaft power with the immersion depth of the intake air quantity can be adjusted. Because of this, the jet type aeration machine can be used in the large water level change pool.
QSB type for deepwater automatic inhale submerged jet jet range
QSB type deepwater automatic inhale submerged jet aerator can run normally under a continuous in the following: the highest dielectric temperature not exceeding 40 DEG C; 2 medium pH in 5~9; 3 medium density does not exceed 1150kg/m.
QSB type deepwater automatic inhale submerged jet aerator jet characteristics
The aeration machine is composed of a submersible electric pump and a jet pump, so that the water body stirring and oxygenation can be simultaneously carried out, which can obtain the higher oxygen absorption rate, and has the advantages of no clogging of the impeller. A strong one-way flow, resulting in effective convection cycle, and the motor load with the water level change is very small, easy to install.
QSB type self-priming jet aerator deep diving machine performance parameters of jet
Model
QSB0.75
QSB1.5
QSB2.2
QSB3
QSB4
QSB5.5
QSB7.5
Note: the table and the amount of oxygen intake capacity is in standard test condition (20 ~ C water pressure 101.325kPa), aerator diving depth of 3M, the test medium is water. In the medium waste water, the increasing gas capacity can be designed according to the coefficient of 0.85.
QSB type deepwater automatic inhale submerged jet aerator installation
The company to assist in the selection, the user should provide pool type, medium characteristics, the required intake, diving depth and other related data, so that the company's design and provide quality equipment to better meet the needs of users. The installation of QSB type deepwater automatic inhale submerged jet aerator with self coupling and mobile two. Auto installation is the base and special aeration device is fixed on the bottom of the pool, the pool roof installation support pieces, so that the two rails connected to the submersible pump with specific bracket connected after slide down along the guide rails on the base of export position, through the weight of pumps, automatic sealing and coupling. Autocoupling installed without installation or maintenance personnel into the puddle can upgrade and install pumps. Mobile installation is the deepwater automatic inhale submerged jet aerator is installed on the bottom of the pool, depending on the weight, with the installation location can be change, flexible and low cost.
Payment method
1, transfer to the public (recommended)
2, the Alibaba Alipay secured transactions (recommended)
3, goods to the payment (deposit)
4, the agreement payment
Quality commitment and service
1, we provide the best quality products and services.
2, our company is committed to the correct installation of equipment, the correct use of the case, from the goods to the date of acceptance within 12 months of good operation.
3, we implement 7X24 hours customer support services, to provide the most efficient and effective service support for any customer.
8, 4 hours of failure response, to provide you with 100% of customer service support
Date of delivery
According to the distance and production cycle.
Logistics delivery
Domestic default for the road logistics, if the special requirements can be specified by the customer logistics company delivery.
Nanjing Sino German environmental protection equipment manufacturing Co., Ltd.
Address: Nanjing City Jinniu Lake District Liuhe Street Community Shuangqiao Xinguang Road No. 115
Contact: Xu Min (Manager) 18913960189
Fax: 025-57530868
Mailbox: njxm668@163.com
Q:121504062 Q