Nanjing Sino German environmental protection equipment manufacturing Co., Ltd.
Address: Nanjing City Jinniu Lake District Liuhe Street Community Shuangqiao Xinguang Road No. 115
Contact: Xu Min (Manager) 18913960189
Fax: 025-57530868
Mailbox: njxm668@163.com
Q:1215040622 Q
Novel double shaft strength sludge cutting machine:
Nanjing Sino German environmental protection equipment manufacturing Co., Ltd. according to customer requirements, combined with the company's production experience, the invention of the sludge cutting machine. The device can be directly connected to the pipeline, the medium of the fibers, particles, hair of the debris cut into the pump can be no obstacle to transport the size, so as to achieve the purpose of protecting the follow-up equipment, improve the treatment effect.
Unique sealing technology, can ensure that the equipment in the case of positive pressure is not water seepage, negative pressure, no leakage
- cutting machine reducer and motor using shaft mounted gear helical gear reducer, the cutting machine has the advantages of compact structure, convenient installation and maintenance.
- cutting machine drive shaft and the driven shaft speed is not the same, so that between the slag and the self-cleaning cutter.
The cutter is left and right spiral spiral - cutting machine, a driving shaft and a driven shaft and then press the left and right spiral spiral arrangement, in order to reduce crushing force, improve the transmission stability of cutting machine.
- cutting machine bearing with seal, in order to ensure the normal operation of the bearing
The cutting blade and gasket - independent, cutting blade and gasket with high strength alloy steel cutting blade. Between the gasket and the axial gap is less than 0.65mm, to ensure the normal driving of the cutting blade, reduce wear, and increase the pressure pad.
L to ensure that the particle size of the blade tip height should not exceed 13 mm root diameter.
- cutting machine shaft, a drive shaft and a drive shaft is made of high strength alloy steel, Quenched and tempered, meet the strength requirements. :
working condition
The equipment is driven by the electric machine to work, and the crushing and cutting of the debris is realized through the following ways.
Firstly, the debris in the sludge is produced by the extrusion force generated by the double axle low speed rotation.
Second: the original device of the blade structure, cutting debris, so as to achieve the effect of cutting debris.
Third: rotating equipment through the biaxial differential, produce tearing force, grinding debris.
Fourth: the equipment shaft differential rotation of the working state, so that the equipment has a good self please function, to avoid long-term winding flexible debris caused damage to the device.
Technology patent
Biaxial strength crushing technique
Sludge cutting technique
purpose
Pump machine protection: in the current running pump and standby pump before the installation of a single body crusher, purification of solid debris, to prevent clogging, and help to maintain the best efficacy of the pump.
Sludge crusher for milling wastewater sludge entrained. The efficiency of sludge decomposition device can be improved after sludge milling.
Industrial waste water: many industrial areas need to carry out wet fluid grinding operations. From the poultry manure to the drilling platform of the oil drilling platform, can be used to deal with the drilling debris, the protection of process equipment.
Again and again, the practice proves that our crusher provides the most economical and effective solution to many customers previously thought to be unable to solve the problem.
L
Submersible or dry type water pump for the protection of the problem of easy blockage
L
Economic solution to the broken demand of water diversion canal in small sewage treatment plant
L
To effectively break the gate slag before processing.
L
A number of small pieces of sludge, and can improve the treatment efficiency of digestion workshop
L
Treatment of sludge from industrial production
The crusher is designed to deal with the sewage and sludge produced in the modern society. Can handle all kinds of waste into the community, industrial waste water collection stations and sewage treatment system.
Crushing power and saving energy
L
Double run at different speed increase of solid tearing ability.
L
Low running speed (typically 50-80rpm) can produce high torque.
L
The lower blade circumferential speed to ensure that energy waste not in water loss, while the abrasive wear rate of the minimum.
L
With a number of exclusive patents.
The best crushing capacity
A rear tipping type blade shaft arranged on the crusher according to the sewage flow angle. This design can capture any discharge. If you need to re - process, you can let the object fall into the inside of the blade. Blade group of different speeds can be torn fiber material, cutting edge and the edge of the knife edge can be cut into pieces of plastic. The peripheral surface of the blade can also crush the brittle object.
Structure and working process
The crusher is mainly composed of the driving parts, the active shaft, the driven shaft, the milling cutter, the seal, and so on. The driving device drives the driving shaft to rotate and drive shaft by crushing machine, precision gear drives the driven shaft, which are fixed on the cutter shafts are reverse rotation, and the solid crushing bite
Structure characteristics
L
Reducer and motor shaft mounted bevel gear reducer, making the crusher structure is compact, installation and maintenance is more convenient.
L
The driving shaft and the driven shaft speed of the crusher are different, so that the self cleaning of the slag of the milling cutter is.
L
The milling cutter used for crushing machine is in the left and right spiral, which is arranged on the left and the right spiral after the drive shaft and the driven shaft are arranged in order to reduce the crushing force and improve the transmission stability of the crusher.
L
Crusher bearing part of the seal, in order to ensure the normal operation of the bearing
L
Separate cutting blades and gaskets
L
High strength alloy steel for cutting blades and gaskets, uniform and hardened to the minimum 45-50HRC.
L
The horizontal clearance between the pad and the shaft is not more than 0.65mm, ensuring the normal drive of the cutting blade, reducing wear and increasing the pressure of the gasket.
L
In order to ensure that the particle size of the blade tip height should not exceed 13 mm root diameter.
L
The driving shaft and the driven shaft are made of high strength alloy steel, Quenched and tempered, to meet the strength requirements.
Nanjing Sino German environmental protection equipment manufacturing Co., Ltd.
Address: Nanjing City Jinniu Lake District Liuhe Street Community Shuangqiao Xinguang Road No. 115
Contact: Xu Min (Manager) 18913960189
Fax: 025-57530868
Mailbox: njxm668@163.com
Q:121504062 Q