Tensile test (tensile test) is a test method for measuring material properties under axial tensile load. The elastic limit, elongation, modulus of elasticity, modulus of elasticity, ratio limit, area ..

The neutral salt spray test (NSS:Neutral Salt Spray test) is in a specific test box. The spray is carried out by the spray device containing (5 and 0.5)% NaCl and pH value of 6.5 ~ 7.2. The salt mist ..

Sulfide stress corrosion (Sulfide Stress Corrosion Cracking, SSCC or SSC) is a special type of stress corrosion (SCC), but it is different from the usual stress corrosion. In the usual stress corrosio..

Because of its good corrosion resistance, mechanical properties and low price, stainless steel has become the most commonly used metal material after carbon steel, and has a good use value in the stro..

HIC hydrogen induced cracking test is also called anti hydrogen induced crack test, hydrogen embrittlement test, hydrogen induced cracking (HIC) in English full name: Hydrogen induced cracking, abbrev..

Stress corrosion cracking (Stress Corrosion Cracking, SCC) refers to the phenomenon of delayed cracking or lagging fracture caused by the synergistic action of corrosion medium and stress in some spec..

The hanging piece corrosion test is to evaluate the corrosion inhibition performance of the water treatment agent by calculating the corrosion rate and corrosion inhibition rate with the mass loss of ..

Point corrosion test, point corrosion, also known as small hole corrosion, is a form of corrosion, which is concentrated in a small range of metal surface and penetrates into metal or even perforation..

The simulated corrosion test means that the actual environment of the material is simulated in the laboratory, and the corrosion resistance of the material to the environment is evaluated through the ..