Seamless titanium tube, titanium U type tube
Titanium tube: ASTM B338/ASME American Standard strict implementation of SB338, ASTM B861/ASME SB861 & DIN17861
GB: GB/T3625, GB/T3624
Titanium tube American Standard brands: Gr.1 Gr.2 Gr.3 Gr.7 Gr.9 Gr.11 Gr.12 Gr.16 Gr.17
Titanium tube domestic brands: TA2 TA9 TA10 TA18 TA1
Titanium tube outside diameter 6.0-114mm
Titanium tube wall thickness 0.3-8.0mm
Titanium tube length is less than or equal to 18000mm
Titanium tube is of light weight, high strength and excellent mechanical properties. It is widely used in heat exchange equipment, such as heat exchanger coil, heat exchanger, serpentine heat exchanger, condenser, evaporator and pipes etc.. A lot of nuclear power industry put titanium tube as its standard pipe
Titanium tube in accordance with the requirements of the use and performance of different implementation of the two national standards: GB/T3625-2007 ASTM GB/T3624-2010 337338
Supply brand: TA0, TA1, TA2, TA9, TA10, BT1-00, BT1-0, Gr1, Gr2,
Supply specifications: diameter 4~114mm
Wall thickness Delta 0.2~4.5mm
Length 15m
A reference standard
1 GB 228 metal tensile test method
2 GB 224 metal tube hydraulic test method
3 GB 226 metal tube flattening test method
4 GB/T3620.1 titanium and titanium alloy grades and chemical composition
5 GB/T3620.2 titanium and titanium alloy products and components for chemical composition and deviation
Two technical requirements
1 chemical composition of titanium and titanium alloy tubes shall comply with the provisions of GB/T3620.1, the re inspection, Kun Ming titanium chemical composition allowable deviation of GB/T3620.2 compliance.
2 the allowable deviation of the outer diameter of the pipe shall be in accordance with the table 1.
3 the allowable deviation of the wall thickness of the tube shall not exceed 12.5% of the nominal wall thickness. The deviation of the tube wall thickness is not suitable for the welding of titanium welded pipe.