The coal machine equipment for coal, grinding, spray, separation procedure is completed on the host. The flame temperature is adjusted by electric vibration feeder to coal quantity
Control to achieve. After grinding through the fine pulverized coal separator separation, the particles are less than 0.1mm fans out burning, and more than 0.1mm powder
In the separator, the top of the pipe and the baffle cap under the action of gravity, because of its sinking to the bottom of the separator, the reflux pipe into the cavity to squeeze the coal mill.
In the production of the use of the separator should always check the return pipe, do not plug. This machine has high burning rate, one is effectively
The specialty of the pulverized coal injection technology, that is, to maximize the expansion of coal combustion and oxygen in the air contact area to contribute to the intense and rapid oxidation process.
Two is through the rapid operation and rotation of the pulverized coal air flow, so that the volatile gas film quickly from the fixed carbon, thus speeding up the carbon burning rate.
The rapid burning of coal, the rapid operation of the flame, the semi enclosed combustion chamber and adequate and reasonable air supply not only contributed to the burning, but
And also greatly reduce the heat loss of coal, for the full use of raw coal, has opened up a new road