Taiyuan gas decompression skid Run Feng model is complete
Parts, equipment and related materials specifications and performance should be consistent with current national standards and design file name component pipelines used in indoor gas engineering, and should have qualified documents; gas appliances, gas equipment and metering device must be selected by the agency approved by the competent department of the state detection detection of qualified products and unqualified must not be used.
When the material, equipment and piping components of the 3.2.3 gas indoor project come into use, the construction unit shall organize the inspection and acceptance according to the current national standards and design documents, and fill in the corresponding records. Acceptance should be based on the appearance inspection and inspection of quality documents. When there is doubt about the quality of the products or the qualified documents of the products, the relevant units should be classified and sampled according to the inspection standards of the products under the witness of the supervision (construction) units.
Parts, equipment and related materials specifications and performance should be consistent with current national standards and design file name component pipelines used in indoor gas engineering, and should have qualified documents; gas appliances, gas equipment and metering device must be selected by the agency approved by the competent department of the state detection detection of qualified products and unqualified must not be used. Brief introduction of special pressure regulating box for gas boiler
Gas boiler pressure regulating box (cabinet), this product is mainly for gas fired boilers, direct fired units, factories and mines pressure regulating and industrial furnace design, production. It has the advantages of integrated design, overpressure protection device, automatic switching of main and auxiliary roads, reasonable structure, many functions and high reliability.
Main technical parameters of special pressure regulating box for gas boiler
Connection mode: flange connection PN1.6MPa; DN50, DN80, DN100, DN150, DN200, DN250, DN300
Maximum inlet pressure: 0.4/0.8MPa;
Outlet pressure range: 1 ~ 100KPa;
Constant voltage precision: AC2.5;
Closing pressure: SG5;
Closing pressure zone: SZ5;
Adaptation temperature: -20 ~ 60 degrees celsius;
Cutting accuracy: AC5;
Corresponding time: t