Working principle of dust collector in pharmaceutical factory:
The dust will set placed between independent and the corresponding wind pipe and suction hood is connected with the dust collector, inserted through power supply, open the fan button, dusty air from dust by dust shield, air duct, air inlet into the box, suddenly due to air support, the velocity is suddenly reduced, the large grain powder at the weight of the dust in the air under the action of the separation and settlement to the ash drawer, the remaining dust particles due to the cartridge filtration, collision, hook, electrostatic and other effects, were stranded on the filter wall. The purified air by the fan through the outlet. After the cleaning, the air can be directly discharged into the indoor recycling use, no ventilation heat (cold) loss. With automatic pulse cleaning, the cleaning process is not required to be shut down. Due to the use of pulse cleaning, users need to bring their own gas source.
Scope of application: chemical pharmaceutical, food processing, metallurgy, casting, carbon materials, machinery processing, building materials and other industries, mixing machine, batching, mixing, vibrating screen, mill, weighing, and other dust purification.
Air volume: 800m3/h~32000m3/h
Characteristics of dust collector in pharmaceutical factory:
1, dust collector efficiency is high, the filtering effect is good, the appearance size is small, the operation is stable.
2, the filter cartridge is installed, the sealing performance is good, firm and reliable.
3, filter tube service life is long, installation, maintenance is convenient.
4, adopting the air tightness design, good sealing performance, excellent sealing material with inspection doors, air leakage rate is very low.
5, inlet, outlet duct layout is compact, small airflow resistance.
The airflow distribution of the dust collector in pharmaceutical factory is very important, which must be considered how to avoid the high wear area of filter material due to the high wind speed. Air distribution plate is used to filter the dust collector with unique requirements, and the airflow distribution must be very stable and uniform. Before it is conducive to the rise of air and dust, air distribution plate opening rate of 35%. According to the calculation, resistance system