LFEF type glass fiber bag precipitator is for new product research and development of high temperature flue gas and dust, the machine adopts PLC microcomputer control, sectional reverse blow, timing, constant resistance cleaning, temperature testing and other measures, so that the glass fiber bag precipitator can be efficient and stable operation in high temperature exhaust gas in the dust emission concentration is lower than the outlet of chimney the provisions of the state 100mg/Nm3 emission standards (up to less than 50 mg/Nm3). The equipment is not stopping room change bag, simple operation, safe and reliable operation, low cost, is the effective solution to high temperature flue gas and dust, the dust collector has been large series, suitable for purification of corrosive gas in the furnace, calcium carbide furnace, rotary kiln, high temperature and high humidity.
Structure of LFEF type glass fiber bag type dust collector:
LFEF type fiberglass bag type dust remover is composed of a dust gas entrance to the outlet of the purifying flue gas, the body structure is composed of an air inlet pipe and an inlet chamber and a bag chamber, an ash bucket, ash valve, outlet pipe and reverse blowing system and dust control system.
The dust remover body is all steel structure, and design measures by thermal expansion, the shell is made of light wool board surface with double insulation, Delta =0.5 galvanized steel door, and the installation of new technology pulling rivets, cold pressing rolling rolling forming process of plate, not only increasing the strength and ensure the quality of equipment.
LFEF type glass fiber bag precipitator is used in the special treatment of high temperature resistant glass fiber cloth, the flexural strength and abrasion resistance, and thermal shock performance were good, and according to the different characteristics of flue gas, corresponding treatment of glass fiber, to the use requirements and emission standards.
Main technical parameters of LFEF type glass fiber bag filter:
Parameter \ specification LFEF10 * 358 LFEF9 * 358 LFEF8 * 358 LFEF7 * 358 LFEF6 * 358 LFEF5 * 358 LFEF4 * 358
Treatment air volume (m2/h) 750006400053000 43000 107009660085000
Filtration area (M2) 214817901432 3580322028642506
Unit count (room) 10987654
Filter strip number (352) 880790704616528440
Filter wind speed (m/min) < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 < 0.5
Equipment resistance (Pa) < 1570 < 1570 < 1570 < 1570 < 1570 < 1570 < 1570
Maximum treatment temperature (c) 280 280280280280280280
Efficiency (%) > 99.8 > 99.8 > 99.8 > 99.8 > 99.8 > 99.8 > 99.8
Equipped with kiln type (m) and phi 3.2 and phi 3.2 * 12 * 10 * 10 2.9/3.0 and Phi Phi 2.5/2.8 Phi Phi 2.3 * 10 * 10/8.5 2.2/2.0