Overview of TXP type ceramic cyclone dust collector:
TXP type dust collector is the design of a new type of cyclone developed in the original multi cyclone dust collector based on the highest coefficient of structure optimization, the tyman. Internal and external shell and components using the ceramic tube block masonry, to ensure the wear resistance, not only the service life is guaranteed, and reduce the amount of steel, reduce the cost of equipment and maintenance costs. Solve the problem of the cyclone dust collector.
Dust removal mechanism of TXP type ceramic cyclone dust collector:
The dust collector uses the peak of the velocity field distribution in the cyclone tube to the smoke rising, and is provided with an ascending barrel and a two separation chamber and an intermediate exhaust pipe. From the entrance to the design of swirl speed of flue gas into the cylinder, dust by centrifugation and separation, the separation of the dust along the cylinder to the ash settlement tank; flue gas to flow peak velocity along the 0.6 cylinder diameter increased, part of the flue gas containing dust concentration rises along the cylinder wall into two separation chamber high speed. Then, the bypass duct back cone, two dust separated dust to the cone bottom together with a separation of the ash into the groove. The two separated smoke is discharged from the middle exhaust pipe. Due to a rise in cylinder swirl velocity rise than the main cylinder is much higher, so the dust can be effective for separating two times. Greatly improve the overall efficiency of dust removal.
Technical performance of TXP type ceramic cyclone dust collector:
Model specification
Air volume m3/h
Inlet wind velocity m/s
Resistance coefficient e
Reference resistance Pa
Efficiency%
TXP-3
700-1100
15-25
Six point four
490-1420
80-95
TXP-4
1350-2250
TXP-5
2000-3500
TXP-6
2200-3650
TXP-7
3800-6400
TXP-8
5200-8500
TXP-9
6800-12000
TXP-10
8500-1450