The configuration of the new gas surge tank
The special surge chamber for special surge chamber is provided by users according to GB50028-93 5.6.5 of the town gas design code, which is located in a single single story building connected to the building of gas generation.
The characteristics and requirements of the equipment structure of gas regulating chamber:
(1) a ripple compensator is installed on each voltage regulation line to regulate the leakage of flange interface caused by the change of temperature and to facilitate the disassembly of the equipment.
(2) add a set of cut-off valves with corrugated compensators at each pressure regulating outdoor inlet pipe.
(3) a safety release valve is installed before the inlet valve of each pressure regulating chamber, and the discharge pipe exceeds the roof 2.5m.
(4) every pressure room is managed by the manufacturer, and a combustible gas alarm device with centralized alarm is installed to ensure the inspection once a day and make a good record.
The filter net of the user's own filter, the nitrile film and other vulnerable parts are changed in time.
The pressure regulating chamber are equipped with hot water heating device.
In recent years, the user specific pressure regulating equipment is more than flange interface leakage occurs, especially off the flange interface leak valve of outdoor pipelines, then strengthen the management to improve the job system, regular replacement of flange gasket and provided with corrugated compensator to solve the problem of leakage of flange due to temperature effect.
Since the system is running, the effect of voltage regulation is good, the operation is stable, safe and reliable, and the management is in place.
However, the special voltage regulating room is more suitable for industry, enterprise and public service users, and the construction unit can provide the position of special voltage regulating room. It is not suitable for the residents.
Contact: Tan Gong 180-0338-3735 can add WeChat to QQ:289424295 at any time