The steam interlayer pot, the interlayer pot, the manufacturer, the dairy product, the sandwich boiler, the steam heated interlayer pot is made by the boiler or the steam generator with a certain pressure as the heating source, and the temperature can reach 135 degrees. The steam heating interlayer pot can be heated quickly and effectively, with the advantages of large heating area, uniform heating, short boiling time of liquid material, safe operation and convenient operation. But in the process of use, it is necessary to observe the pressure at any time and adjust it. The scope of the steam heating sandwich pot is very wide, can be used to cook porridge stew soup, cooking etc.. As the main production and processing equipment for food processing, the steam sandwich pan is a necessary choice for you.
Use of steam sandwich pan
1, feeding before the injection of a small amount of water in the sandwich pot, open the bottom valve, and then open the inlet valve, the cold air in the sandwich pot drained, close the valve, when the pressure gauge pointer up to the sandwich pot set the working pressure, adjust the safety valve, automatic gas to discharge the provisions of the pressure equipment, and then close the intake valve to stop gas supply.
2, clean the interlayer pot and put it into the material. The intake valve should be slowly opened. When the material reaches the required temperature and the scheduled heating time, the intake valve is closed. Open the drain valve, release steam, make the pressure of the sandwich pan zero, vertical sandwich pan, can rotate the handwheel, so that the pot body tilt, import and discharge material. At this point, a job is completed.
3, once each operation is done, we should open the drain valve and drain the condensate in the interlayer of the boiler. If the water in the interlayer is too large, it is necessary to check if there is any malfunction of the steam drain, so as to ensure the normal operation of the heat exchange, so as not to prolong the operation time and affect the work efficiency.
4, in order to keep clean, each use once, should be cleaned once.
5, tilting type sandwich pot should check the rotating parts lubrication is good before use, should be filled with the grease cup and will bite at the turbine worm, the amount of grease injection
6. After the air intake is stopped, the straight mouth cock at the bottom of the sandwich pan should be opened and the residual water is put out.