The horizontal steam single pot sterilizing pot of high temperature and high pressure sterilization cooker has three kinds of sterilization methods: water bath, steam and spray. Water bath sterilization is usually carried out with packaging sterilization. It has a complete sterilization for food, low return rate, can protect the flavor and color of products, and process water can also be recovered and cost saved. Suitable for soft packaging, metal containers, such as aluminum foil bag, transparent bag, vacuum bag, cooking bag, tin cans, aluminum cans etc.; not suitable for glass containers, aluminum cans, plastic containers, such as bottle of polypropylene, high density polyethylene bottle etc.. Steam sterilization is the direct flow of steam into the sterilizing pot, and it has certain pressure, which can be quickly germicidal in a short time. The sterilization is uniform and the effect is good, but the taste and color of some of the ingredients can be changed greatly. Suitable for soft packing, metal containers packaging and plastic packaging containers such as aluminum cans, aluminum foil bags, high-temperature cooking bags, PP bottles, HDPE bottles, tin can not adapt to the glass container. Spray sterilization has top spray and side spray, water jet from different angles, perfect temperature distribution, good germicidal effect, short sterilization time, not easy to cross pollution. It is suitable for all kinds of high temperature resistant packaging materials, such as glass container, metal container, soft bag packing, aluminum container plastic container and so on.
Horizontal sterilizing cooker
1. Fast warming
In the pot, a small amount of circulating water is entered and the imported high efficiency heat exchanger is used. The packaging can rapidly rise from 20 degrees to 121 degrees in 10-15 minutes.
2. The temperature in the tank is stable and the heat distribution is uniform
The hot water spray system is equipped with a series of nozzles on the four corners of each tray in the processing tank, so that the atomized hot water is fully contacted with the product, thus ensuring the same temperature at each point inside the device.
3, save energy
Steam condensate recovery system can directly recover condensed water generated by heat exchanger during heating process, and is used as circulating water for sterilization, thereby reducing energy consumption.
4. Indirect heating and cooling to prevent two pollution
The circulating water is indirectly heated or cooled by heat exchanger, the circulating water has been kept under aseptic condition, when heated or cooled after sterilization, drying the surface and bags of water droplets on the surface, it will not leave the white scale small, the whole package is transparent, clean, prevent pollution two.
5, perfect pressure control, suitable for sterilization of gas package
We have received the pressure balance system of patent is crucial for containing gas sterilization packaging, because gas packing pressure balance and precise control in heating, cooling stage, and the "PACKACE" control system can handle tank temperature and pressure were monitored, and the pressure in the tank in order to make correction. The packaging and the pressure in the corresponding. Packing of air or gas containing any percentage and packing in vacuum can be sterilized, and the packaging and contents will not be damaged or deformed.
6, perfect heating, cooling, suitable for fragile bottling sterilization
When circulating water is heated at room temperature and heated by the heat exchanger, the circulating water will be cooled from the real time temperature through the heat exchanger to avoid the problem of glass bottle breakage due to the large temperature difference.