Shandong YN27C diesel jackdrill picture handheld diesel drill manufacturers
YN27C, a rock drill scope and characteristics
YN27C handheld diesel drill suitable for rock drilling, if the replacement of a few parts can be changed into a crusher and ramming machine, working various crushing, chipping, mining, splitting, ramming and so on in order to. YN27C handheld diesel drill both in the mountains, plains; both at +40 DEG C of-40 DEG C hot or cold area, can carry out the work. This machine has a wide range of adaptability.
The main parameters of four YN27C diesel rock drill
Host weight 27kg
Engine displacement 185cm3
The load of the engine speed (measured at the five hole cut more than 2450r/min)
Drill rod idle speed is greater than or equal to 200r/min
The drill shank size drill tail six angle 22x108mm
The deepest hole depth more than 6m
The volume is more than 1.14L
The borehole speed is greater than or equal to 250mm/min
Mixing ratio of gasoline and lubricating oil (by volume) 9:1
Spark plug electrode gap 0.5 ~ 0.6mm
The fuel consumption rate (measured at five chisel hole) less than 0.12L/M
Three, YN27C diesel jackdrill factory mode
Contact: Zhang Fan
Tel: 0537-2676996 Fax: 0537-2670398
Cell phone: 15589713226 QQ:2881248859 WeChat: 15589713226
. Welcome you to add WeChat: WeChat: 15589713226 hengwang heavy industry limited company mainly produces:
1 engineering rock drills, KHYD40, KHYD75, KHYD110, KHYD125
2 KHYD40A, KHYD75A, KHYD140, KHYD155, zqsj-90, zqsj-140, mine water drilling rig
3 ZLJ-350, ZLJ-700 tunnel drilling rig ZLJ-250, ZDY-650, ZDY-800
4 hand held rock drills, hand push type rock drills, impact rock drills
5 ZM15, ZM12 coal electric drill, emulsion drilling machine ZRS50, wind coal drill ZQS30, ZQS40, ZQS45, ZQS5