The rosin pot is a device for processing hairs and hairs of poultry and livestock products. The heavy Nuo rosin pot, by means of electric heating, has changed the traditional way of burning coal and burning coal, and melted rosin by heating the heat conducting oil. Heavy Nuo rosin pot automatic temperature control, can be divided into file control, using the process of no pot, no black smoke, saving rosin, economic and environmental protection, it is you again to the livestock and poultry for hair removal of the necessary products.
First, the use of Matsuka Nabe
The rosin pot is a kind of equipment designed for the processing procedure of pig's head and pig's hoof, which is specially used to melt the rosin. The heating power is adjustable, the temperature is automatically controlled and the production efficiency is high. The rosin pot is the first choice for all the food processing enterprises and is deeply loved by the users.
Two, Matsuka Nabe's characteristic rosin cooker takes 380V power as the heat source, the interlayer is equipped with electric heating tube, electric heating couple and heat conduction oil, up to 150 degrees centigrade, and the heating temperature is automatically controlled by the electronic control box. The utility model has the advantages of large heating area, high heat and interest rate, uniform heating, short boiling time of liquid materials, and easy control of heating temperature. Matsuka Nabe inner pot (inner pot) is made of acid resistant and heat-resistant austenitic stainless steel, with petrol cup and electric control box. The equipment is beautiful, easy to install, easy to operate, and reliable in insulation performance.
Three, the use and operation of rosin pot 1, before the use of the first 320 heat conduction oil, filling the oil level with the oil standard. 2, when refueling, the hole three pipe should be screwed down and the dipstick hole should be screwed open for exhaust. 3, when the oil arrives at the oil level, let it stop for 10 minutes and then reheat. 4, heating first close the leakage switch in the distribution box, pull the power switch on the distribution box door to the open position. At this time, the temperature controller has electricity, and it can set the number first. 5. When setting the temperature controller, press the SET button first. When the number is flashing, it can be increased or reduced according to the number of labels. 6, add rosin, general rosin into rosin barrel 4/5.
7, heating, pull the heating switch on the panel of the distribution box to the direction of heating, and point to the right upper part. At this time, the heating lamp is green and the heating starts to work.
Four. Matters of attention to Matsuka Nabe's use
1. first, check whether the power of the rosin pot is properly connected and whether there is electricity leakage.
2. check whether the parts of the rosin pot bearing are lubricated. 3. heat conduction oil is not easy to add too full, eight achievement can be, otherwise heating will overflow the sandwich pot, in order to prevent the occurrence of wounding accident.
4. the vent hole of rosin can not be blocked, otherwise the oil temperature is too high to cause accidents.
5. if the frequency of the rosin pot is high, the heat transfer oil should be replaced regularly and the heating pipe is cleaned. It is beneficial to improve the heating efficiency and prolong the service life of the sandwich pan; pay attention to the oil level, prevent the heating pipe from burning, and have the quality accident.
6. if the rosin pot is discharged, it should block up the stoma first, so as to prevent the hot oil from overflowing and hurting people.
7. dry your hands when you operate. Do not bring water to prevent electric shock.