Product Details

Jiameng filter cartridge Taiwan Jiameng filter

Price 280
Unit
Yield 1000000/年
Place of Production 杭州
Product Category 其他
Delivery Time 2天

Product Detail Parameters

品牌 佳洁

Product Description

Jiameng filter cartridge Taiwan Jiameng filter cartridge
【1】 Taiwan Jiameng filter element description:
Product introduction of Jiameng filter element
Taiwan Jiameng Taiwan Jiameng filter element high density aluminum extruded filter shell. The design of anode antirust treatment and pressure relief device is perfect.
Filter core: the inner layer adopts four layers of active drainage oil drainage "borosilicate micro glass woven micro" filter material, matched with two layers of stainless steel supporting filter screen and fixed screw, and the outer layer is covered with silicon free foam which can resist synthetic oil. One year quality life guarantee.
Ordering instructions:
Stainless steel shell model filling p
High pressure shell model filling H
Model filling D of internal self draining device (grade) - 20, including the following special)
Model of external self draining device add D ((grade) - 40 or above)
Model of pointer type differential pressure gauge filling G
Replacement of filter element: the filter element shall be replaced every 8000 hours or every year regularly or when the differential pressure indicator pointer is in the red area (about 0.07MPa pressure drop); the H-class activated carbon filter element shall be replaced when it is used for 3000 hours or every year regularly or when it smells peculiar smell to ensure good filtering effect. The filter element is used under abnormal conditions, which is not within the scope of quality life assurance.
Filter precision (level)
Class m - main line filter
Multi purpose with air compressor after cooler or before freeze dryer and other filters to protect the whole system. It can filter out a large number of liquid and solid particles of more than 3 μ m, and achieve a low residual oil content of only 5ppm w / W.
Class L - air line filter
Multiple devices are installed in front of tools, machinery, motors, cylinders and other equipment and A-level ultra efficient oil removal filter, or after the adsorption dryer to remove water and particles. It can filter the liquid and solid particles as small as 1 μ m, and the residual oil content is only 0.5 ppm w / W.
Grade o - ultra high efficiency oil removal filter
It is mainly used upstream of the adsorption dryer or downstream of the freeze dryer to ensure that the air used in the system is completely oil-free. It can filter the liquid and solid particles as small as 0.01 μ m, and the residual oil content is only 0.001 ppm w / W. Remember to install T-level air pipeline filter upstream to protect it.
Grade V - activated carbon deodorization filter
The filter element can completely absorb the peculiar smell of hydrocarbon and other gases through the special activated carbon infiltration treatment, so as to meet the requirements of high quality air quality, such as food, medicine, breathing air, etc. It can remove oil mist and hydrocarbon as small as 0.01 μ m, and the residual oil is only 0.003ppm w / W. Remember to install A-level super efficient oil removal filter upstream to protect it.
External type filter model large treatment air volume (Nm3 / min) inlet and outlet pipe diameter (inch) external size (mm) weight (kg) filter model filter element
number
Outer diameter overall length
JF series pipe thread (grade) - 10 1.6 3 / 4 ″ Pt 105 250 1.8 (grade) - f0E 1
(level) - 20 2.8 1 ″ Pt 105 320 2.0 (level) - F1E 1
(level) - 40 5.8 1-1 / 2 ″ Pt 140 430 3.8 (level) - F2E 1
(level) - 60 8.5 140 650 4.6 (level) - F3E 1
(level) - 100 16.8 2 ″ Pt 150 720 11 (level) - f4e 1
(level) - 150 24 2-1 / 2 ″ Pt 150 1100 13 (level) - l1e 1
JL series flange type (grade) - 200 30 3 ″ FL 300 1000 45 1
(level) - 400 60 4 ″ FL 380 1100 80 2
(level) - 700 90 6 ″ FL 500 1200 120 3
(level) - 900 120 530 1200 150 4
(level) - 1250 150 8 ″ FL 560 1300 200 5
Operating pressure under working condition: ≤ 1.0MPa (@ 0.07MPa) inlet temperature: 66 ℃ (C / T / a) 50 ℃ (H)
Large pressure drop: 0.07MPa
Jiameng c-f1e filter cartridge Jiameng c-f2e filter cartridge Jiameng c-f3e filter cartridge Jiameng c-f4e filter cartridge Jiameng c-f5e filter cartridge Jiameng c-l1e filter cartridge
Jiameng t-f1e filter cartridge Jiameng t-f2e filter cartridge Jiameng t-f3e filter cartridge Jiameng t-f4e filter cartridge Jiameng t-f5e filter cartridge Jiameng t-l1e filter cartridge
Jiameng a-f1e filter cartridge Jiameng a-f2e filter cartridge Jiameng a-f3e filter cartridge Jiameng a-f4e filter cartridge Jiameng a-f5e filter cartridge Jiameng a-l1e filter cartridge
Jiameng h-f1e filter cartridge Jiameng h-f2e filter cartridge Jiameng h-f3e filter cartridge Jiameng h-f4e filter cartridge Jiameng h-f5e filter cartridge Jiameng h-l1e filter cartridge
Hangzhou Jiajie mechanical and Electrical Equipment Co., Ltd. is willing to provide reliable products and perfect services for the majority of users with technology, advanced manufacturing process and strong service force
Welcome to ask for filter element details!
Company: Hangzhou Jiajie Electromechanical Equipment Co., Ltd
Address: 268 Shida Road, Jianggan District, Hangzhou
Tel: 0571-86458031 Fax: 0571-86465021
Mobile: 13606607916
E-mai: zsp615@163.com website: www.hz7568.com
Contact person: Zhu sai