Wood anticorrosion equipment
Henan Tai Pan Boiler Manufacturing Co., Ltd. produces wood flame retardant (wood protection / modified unit) for the treatment of various kinds of wood, such as anticorrosion / flame retardant / dyed / degreasing. The utility model has the advantages of wide applicability, good processing effect, large capacity, reasonable layout, and safety and reliability. The unit not only saves labor, but also improves the quality of wood processing. In order to avoid the unsafe hidden danger caused by some man-made factors such as misoperation, the unit has made a thorough design in the safety interlocking control system, which greatly improves the reliability of the safe operation of the equipment, that is, when the door cover is not locked to the position, press the press button and the button is invalid. It is impossible to carry out the step-up instruction. If there is still pressure in the tank, press the release button, the button is invalid, and the command can not be executed. Specifications: DN800 x 8500; DN1000 x 8500; DN1200 x 8500; DN1500 x 8500; DN1800 * 8500; DN1800 x 12000 (because the layout is limited, only part of the specifications, if other specifications, diameter, length, pressure >, can be designed according to the requirements of the user and exempt from the design fee).
A brief introduction of CCA wood preservative
The CCA wood preservative produced by our company is a water preservative consisting of a variety of chemical components. The appearance is brown and yellow liquid. It has the characteristics of high efficiency and low toxicity, good permeability in wood and strong resistance to loss. The surface of the treated wood is light green, does not affect the paint and coloring, and does not reduce the strength and insulation of wood. There is a slight increase in hardness, a slight increase in hardness, an increase in hysteresis, and an enhanced grip strength. As the components of CCA have effective prevention and killing effects on rotten fungi, fungi, and termites and many wood pests, plus the good firmness of CCA in the wood, CCA can still provide long term for wood even in a variety of harsh environments. Effective protection.
Vacuum pressure impregnation (VPI) should be used when the wood is treated with CCA. The concentration and treatment time of the solution should be adjusted and changed with the following factors:
Target retention. Required penetration depth. Wood species. Processing methods. Wood moisture content
CCA wood preservative has been used in the world for more than 100 years and has been treated by CCA for eighty years without decay. Its effect has no doubt that.CCA is divided into several models and categories. Our company produces CCA Oxide Type C 70%, or C type oxide 70%, which is the best of all models at present. One kind, in line with the American timber Protection Association (AWPA) standard P5-02 Type C, and also in line with the Australian Standard, British Standard, Malaysian Standard and New Zealand, including the Potala Palace, including the three major Tibet temples, such as the national key projects, the use of our products.
Main engine manufacturing standard: GB150 - 1998 "steel pressure vessel"
Specification table for wood protection equipment
Tank diameter, tank length, single tank timber volume (cubic meter)
DN1000 60002.75
DN1000 80003.5
DN1200 60004
DN1200 80005
DN1500 60006
DN1500 80008
DN1800 60009
DN1800 800011
Website: http://www.tkboiler.com. mailbox: zgtkgl@163.com
Tel: 13526651988 contact: Liu Benxiang
No cheating on the market, no cheating on customers, conscience, no regret, honesty is greater than the sky.