German HYDROPA pressure relay DS117 pressure switch
The German DS-117 / DS-112 / DS-302 / DS-307 / DS-502 / DS-507 / DS-802 / pressure switch, pressure relay, Germany DS-117 / DS-112 / DS-302 / DS-307 / DS-502 / DS-507 / DS-802 / pressure switch, pressure relay, Kunshan Su Mei
A large number of DS117 plate, tube type installation series of inventory sales.
Pressure range: 5~70bar 10~150bar 20~240bar 20~350bar DS117-B (G1/4 for use; pipe installation interface, two bolts, inner six angle regulator) series: 5~70bar 10~150bar 20~240bar 20~350bar DS117-BV3 KKK (G1/4 series inventory; pipe installation interface, two bolt fixed, knurled handle pressure) series: 5~70bar 10~150bar 20~240bar the full range of 20~350bar DS117F (inventory; plate mount, four angle square fixing hole, inner six angle regulator) series: 5~70bar 20~240bar 10~150bar 20~350bar large quantities of inventory inventory;
Product description
DS-117- * * * F plate type installation
Ambient temperature: -40 degrees C -90
Protection: IP 65
Installation method: flange
Pressure range: Pmax 5-70bar = 200bar
Pmax 10-150bar = 400bar
Pmax 20-240bar = 500bar
Pmax 20-350bar = 500bar
Working medium: hydraulic oil
Can not be used in explosive gases.
Mounting screw 2-M5 * 70, DIN912-12.9 (not available when supplied)
DS-117- * * * / P90 / B board installation
Ambient temperature: -40 degrees C -90
Protection: IP 65
Installation method: flange
Pressure range: Pmax 5-70bar = 200bar
Pmax 10-150bar = 350bar
Pmax 20-240bar = 350bar
Pmax 20-350bar = 350bar
Working medium: hydraulic oil
Can not be used in explosive gases.
Mounting screw 2-M5 * 40, DIN912-12.9 (not available when supplied)
DS-117- * * * * B and DS-112- * type pressure relay
Ambient temperature: -40 degrees C -90
Protection: IP 65
Installation method: G1 / 4 female thread
Pressure range: Pmax 5-70bar = 200bar
Pmax 10-150bar = 400bar
Pmax 20-240bar = 500bar
Pmax 20-350bar = 500bar
Working medium: hydraulic oil
Can not be used in explosive gases.
IP 65 weight 0.27Kg
Standard type (DS-117) optional supply type (DS-112)
DS-507 (502)
DS-507 (502) / F
DS-507 / F / V2
DS-507 / F / V2 / AS-H2
DS-507 / SCH / V2
DS-507 / F / P
DS-117-***/F plate installation
Ambient temperature: -40 degrees C-+90 degrees C
Protection: IP 65
Installation method: flange
Pressure range: Pmax=200bar 5-70bar
Pmax=400bar 10-150bar
Pmax=500bar 20-240bar
Pmax=500bar 20-350bar
Working medium: hydraulic oil
Can not be used in explosive gases.
Mounting screw 2-M5*70, DIN912-12.9 (not available when supplied)
DS-117-***/B/P90 plate installation
Ambient temperature: -40 degrees C-+90 degrees C
Protection: IP 65
Installation method: flange
Pressure range: Pmax=200bar 5-70bar
Pmax=350bar 10-150bar
Pmax=350bar 20-240bar
Pmax=350bar 20-350bar
Working medium: hydraulic oil
Can not be used in explosive gases.
Mounting screw 2-M5*40, DIN912-12.9 (not available when supplied)
DS-117-***/B and DS-112-*** type pressure relay
Ambient temperature: -40 degrees C-+90 degrees C
Protection: IP 65
Installation method: G1/4 female thread
Pressure range: Pmax=200bar 5-70bar
Pmax=400bar 10-150bar
Pmax=500bar 20-240bar
Pmax=500bar 20-350bar
Working medium: hydraulic oil
Can not be used in explosive gases.
IP 65 weight 0.27Kg
Standard type (DS-117) optional supply type (DS-112)
Wiring:
Normally closed: 1-2.
Open 1-3 connection::
Normally closed: 1-3.
Open: 1-2.
Pressure adjustment and locking only with one tool
Adjust the pressure and lock the following: with a 6MM of the six angle wrench through the locking screws to adjust the internal surface of the pressure adjustment screw, after the adjustment with the same tool to adjust the outside of the lock screw.
Nominal cutExchange capacity
Standard micro switch: silver contact (AG999)
CEE 24; VDE 0630 50TSD cycle, T85
C22.2 No.55 6TSD T90, UL1054/CSA voltage
V maximum switching capacity
Resistive load motor
A
250AC 51
24DC 54
DS-117
When adjusting the switching pressure value is the maximum value of 60-70%, the switching value is about 5-12%.
This is a plunger operated pressure relay which is suitable for the occasion where an electrical signal is needed to indicate the pressure at a point in the hydraulic circuit.
When the pressure value is not reached the set value, the relay in the micro switch is in a state of pressure. When the pressure value reaches the preset value, the micro switch switch.
The outside pressure through the plunger and the pressure in the slider on the spring force balance, the size of the plunger on the pressure by the spring force and spring force, from the other side of the nut (or knurled wheel) to adjust, after a good tune with a locking screw locking slider. Under the action of the spring force of the micro the switch in pressure state, and when the role in the plunger on the other side of the external pressure reaches the setting value when the plunger pushes the slider move, release micro switch.
1, plug DIN43650
2, micro switch
3, with the scale of the adjustment of the hand wheel
4, locking screw 5, into the oil port (G1/4 female thread)
6, sealing parts
7, card ring
8, O type sealing ring
Performance parameter of pressure relay
DS-507/DB-502 plunger diameter
By 4 - 5 - 6
1, overview
Spring plunger type
Connect the oil port G1/4 female thread tube type or plate type, pitch - 44mm
Adjusting mode adjusting screw or rolling flower adjusting knob
Safety locking screws or safety lock
Installation location arbitrary
2, hydraulic parameters
Pressure regulating range (bar) 40-240 20-150 10-100 5-55 20-350
The precision of the switch is less than 1%
Ambient temperature -40 degrees C to +90 degrees C
Hydraulic oil, oil in water emulsion
3, electrical parameters
Switch type mechanical double throw switch, more than 10 million cycles, silver contact (AG999) optional gold silver palladium alloy contact
Current AC, DC
Protection (according to DIN40050) IP 65
Electrical connection by DIN43650/M12x1 as required
4, characteristics
Main material aluminum
Micro switch stroke of about 0.5mm-- to reduce the wear of sealing and sliding block
The plate is connected through NG6, NG10 valve block (only for DS-507/F and DS-502/F)
DS-507 pressure relay order number
Switching capacity
Nominal switching capacity
Standard micro switch: silver contact (AG999)
VDE0630; 50TSD CEE24 cycle, T85
1054/CSA C22.2 NO.55 6TSD UL, T90 voltage
V maximum switching capacity
Resistive load motor
A
250AC 51
24DC 54
Electrical connection
Function symbol
DS-507 (standard type) DS-502
Connection mode:
Normally closed: 1-2.
1-3 connection: normally open:
Normally closed: 1-3.
Open: 1-2.
Plug with indicator light
The picture above indicates the connection between the lamp plug and the relay. The indicator light can be connected to the online foot 2 or
3 on the "MP" in the line with the lamp plug.
Outline dimension
Outline dimension
DS-507 (502)
DS-507 (502) /F
DS-507/F/V2
DS-507/F/V2/AS-H2
DS-507/SCH/V2
DS-507/F/P
Diaphragm pressure relay DS-802/M/B
Ambient temperature: -40 degrees C-+86 degrees C
Protection: IP 65
Installation method: G1/4 female thread
Pressure range: Pmax=50bar 0.5-15bar
Working medium: hydraulic oil, compressed air
IP 65 weight 0.24Kg
Function symbol:
Wiring:
Normally closed: 1-3.
Open: 1-2 exchange capacity (AC).
Voltage
V resistive load
A light bulb load
A inductive load
A
12550.55
25050.55
Direct current (DC) capacity
Voltage
V resistive load
A light bulb load
A inductive load
A
To 30522
German pressure switch, DS117-70, DS117-150, DS117-240, DS117-350, pressure relay
Tel: (+86) 0512-57910267 57914649
Fax: (+86) 0512-82092939
URL: http://www.smzdh.com
Http://www.kssumei.com
Mail: kssumei@163.co