Shanghai bearing press mounting machine supply 3T-20T model optional.
Bearing press-mounting machine is a multi-functional small hydraulic machine tool, table U-groove, easy to place the shaft and the compression of shaft parts, used for shaft parts and sleeve parts of the press, can also complete stamping, sleeve and other actions.
Bearing press mounting equipment function:
(1) with fast forward, detection, pressing, packing, and return functions.
(2) On-line determination of multi-point pressing quality, the judging conditions can be set according to user requirements, which is convenient for production quality control;
(3) real-time display of pressing curve.
(4) there are various pressing modes for users to choose.
(5) Pressure signal acquisition adopts high-precision signal conditioning module and AD module, the acquisition data is stable and reliable.
(6) perfect self diagnosis system and software and hardware protection. Including drive system overcurrent, overload, limit protection and so on;
(7) the device parameters, control parameters and sensor calibration can be set up according to the requirements of the touch screen.
(8) the segmented control of the pressing process, the control mode, loading speed and target value can be set flexibly.
(9) human-machine interface is beautiful and humanized, with hierarchical authority management.
(10) It has the function of parameter storage. After replacing the fixture, the stored parameters can be selected directly without resetting the parameters.
(11) The device automatically shuts down the start-up function, and automatically shuts down the start-up after the device has not run beyond the set time;
(12) perfect safety protection measures.
Main technical parameters of bearing press equipment: (take 10 tons for example)
Main technical parameters of serial number
1 maximum nominal force: 10T (adjustable 1-10T)
2 liquid pressure: 21MPa
3 inner diameter of cylinder: 100mm
4 slide stroke: 300mm
5 throat depth: 200mm
6 opening height: 500mm
7 fast descending speed of slider: 180mm/s (adjustable)
Slider slow down speed (progressive):24mm/s (adjustable)
8 slider return speed: 150mm/s (adjustable)
9 lower workbench size (length * width):500*400mm
10 slide size (length * width):400*350mm
11 height of worktable from ground: 780mm
12 the precision of equipment pressure control is 1% of the total process and the smallest display unit is 0.1kgf.
13 the AD sampling speed of the system for the force sensor is 300 times / sec.
14 Displacement sensor minimum display unit is 0.01MM, precision (+0.03MM) (using encoder gear sensing device)
15 the parallel accuracy of the upper workbench and the lower work table is: 0.02/100mm
16 working voltage: AC380V, 50Hz, three-phase four wire.
17 power of the whole machine: 5.5KW
18 net weight: 1T
Bearing press mounting machine features: Features
1. the floor type hydraulic press, because the whole is a welding mechanism, has the characteristics of good rigidity, stability and fast speed.
2. The series of hydraulic press is powered by 2-20MPA liquid pressure and connected with three-phase AC 380V 50HZ or three-phase AC 220 60HZ.
3. The series of equipment uses liquid as the medium to transfer energy, using advanced sub-master cylinder hydraulic circuit, low oil temperature, empty stroke speed are above 150 MM/sec, working speed below 30 MM/sec.
4. the equipment is standby, and the noise is no more than 75 dB when sliding up and down.
5. Two control modes, manual and semi-automatic, can be manually mounted on the die stop in any range of stroke, with an emergency lift button, can also be equipped with infrared hand protector.
6. The press stroke of the series press is generally controlled by timer, pressure switch, position sensor, or the customer's own mold.
7. the height of the spindle can be adjusted by the timer or the position sensor.
8. Pressure, stroke, holding time and closing height can be adjusted by customers themselves, which is convenient for operation. It has automatic counting function. It can also be equipped with force measuring display and intelligent temperature controller, which can be customized according to customers'requirements.
9. the range of hydraulic mechanical output of this series is 15tf-100 TF with various specifications. (1tf=1000kgf=9.8KN)