Kunshan small single arm hydraulic press series 3T-15T optional
Scope of application: (bow hydraulic press, precision hydraulic press, electrical parts press, hydraulic press, riveting equipment, hydraulic shaping, key press)
This series of hydraulic presses is widely used for punching, stamping, shaping, riveting, bending, shearing, stretching, pressing of automotive parts, pressing and assembling of various small parts. It is a multi-purpose punch. It is an upgraded product of TM103C series and adopts advanced hydraulic circuit of mother cylinder. It is superior in noise, speed and power consumption. The ordinary hydraulic press is a new generation of hydraulic press with high efficiency, high speed, high output and high environmental protection.
Features of small single arm hydraulic press:
1. The series of hydraulic presses are powered by 2-20MPA liquid pressure and connected with three-phase AC 380V 50HZ or three-phase AC 220 60HZ AC power supply.
2. The series of equipment uses liquid as the medium to transfer energy. It adopts advanced hydraulic circuit of mother cylinder. The oil temperature is low. The empty stroke speed is above 150MM/s and the working speed is below 30MM/sec.
3. the equipment is standby, and the noise is no more than 75 dB when sliding up and down.
4. Adopting a solid open structure with integral welding, the fuselage can be maintained with enough steel and the most convenient operation space.
5. Two control modes, manual and semi-automatic, can be manually mounted on the die stops in any range of stroke, with emergency lift button, can also be equipped with infrared hand protector.
6. The press stroke of the press is usually controlled by a timer, a pressure switch, a position sensor, or the customer's own mold.
7. the height of the spindle can be adjusted by the timer or the position sensor.
9. customers can adjust their pressure, travel time, holding time and closing height to facilitate operation.
10. hydraulic system inside the rack, the appearance is neat, light and stable.
11., it has automatic counting function. It can also install a force indicator and intelligent temperature controller, which can be customized according to customer requirements.
12. the range of hydraulic mechanical output of this series is 15tf-100 TF with various specifications. (1tf=1000kgf=9.8KN)
Characteristics: Features
1. the floor type hydraulic press, because the whole is a welding mechanism, has the characteristics of good rigidity, stability and fast speed.
2. The series of hydraulic press is powered by 2-20MPA liquid pressure and connected with three-phase AC 380V 50HZ or three-phase AC 220 60HZ.
3. The series of equipment uses liquid as the medium to transfer energy, using advanced sub-master cylinder hydraulic circuit, low oil temperature, empty stroke speed are above 150 MM/sec, working speed below 30 MM/sec.
4. the equipment is standby, and the noise is no more than 75 dB when sliding up and down.
5. Two control modes, manual and semi-automatic, can be manually mounted on the die stop in any range of stroke, with an emergency lift button, can also be equipped with infrared hand protector.
6. The press stroke of the series press is generally controlled by timer, pressure switch, position sensor, or the customer's own mold.
7. the height of the spindle can be adjusted by the timer or the position sensor.
8. Pressure, stroke, holding time and closing height can be adjusted by customers themselves, which is convenient for operation. It has automatic counting function. It can also be equipped with force measuring display and intelligent temperature controller, which can be customized according to customers'requirements.
9. the range of hydraulic mechanical output of this series is 15tf-100 TF with various specifications. (1tf=1000kgf=9.8KN)