N.KO en Ke automatic walking groove machine UZ-1
Price |
68500 |
Unit |
台 |
Yield |
1000/年 |
Place of Production |
欧洲 |
Product Category |
其他 |
Delivery Time |
3天 |
|
Product Detail Parameters
最大坡口宽度 |
15mm | 坡口角度 |
15°—50°任意调 |
可切割材料厚度 |
5-40mm | 功率 |
1500W |
转速 |
3600转/分钟 | 坡口速度 |
3.5米/分钟 |
重量 |
94kg |
Product Description
1. N.KO en Ke bevel machine introduction:
N. KO Enke automatic walking flat bevel machine UZ15, maximum bevel width 15mm, bevel angle 15-50 degrees arbitrary adjustment. It can cut 5-40mm thickness material. Power: 1500 watts. It can rotate 180 degrees, and can handle double sided grooves without changing the workpiece. N. KO Enke automatic walking beveling machine UZ15 processing degree of 3.5 meters per minute, suitable for carbon steel, stainless steel, aluminum and other materials. It is suitable for steel structure, pressure vessel, railway manufacturing and so on.
Two, the main features are as follows:
1: The beveled workpiece from Enko UZ15 groove can be used for welding without any further processing. The thickness of any cutting material is 5-40mm, the minimum width is 70mm, and the minimum length is 150mm..
2: the angle of the bevel edge is adjusted within 15 degrees to 50 degrees, no need to change parts.
3: pressure bar and workpiece supporting parts can be adjusted up and down in the range of scale.
4: Germany en Ke machine is equipped with four slots for handling and fixing long and thick workpieces.
5: German N. KO Enko flat beveling machine can operate vertically or horizontally. The workpiece to be cut is firmly fixed.
6: en Ke UZ15 can be from the left or right groove. Flexible and convenient operation.
7: all the electrical equipment of en Ke are installed in the dusty box, and the machine can operate safely.
8: conform to CE standard
Three, technical parameters:
Maximum groove width: 15mm
Groove angle: 15 degrees - 50 degrees arbitrary adjustment.
Thickness of cutting material: 5-40mm
Power: 1500W
Rotate speed: 3600 RPM / min
Speed: 3.5 m / min
Voltage: 380V
Weight: 94kg
The two sides can be turned without turning the workpiece.