Introduction:
Grinding refers to the process of painting, using sandpaper, pumice, fine stone powder and other friction media to friction the surface of the coating or film, which is generally manual work, but also can be carried out by pneumatic or electric devices. Polishing is similar to polishing, the difference is that the abrasive used is coarse and fine, the smaller the size, the finer the particle size; the larger the size, the greater the strength. In polishing, water milling is usually used. The bright stars are first polished with 800~1000 Whether manual or electric polishing, there will always be polishing dust in the process of polishing. The particle size of these dust is very small, easy to suspend in the air, if inhaled by the human body, it will greatly damage the health of the body. Grinding and dust removal table is a kind of industrial environmental protection equipment which integrates worktable and dust collector. On the premise of not interfering with workers'daily work, dust removal workbench can effectively capture suspended fine dust. And the dust removal table can be connected with a special dust purifier to achieve higher dust removal effect and provide workers with a clean and healthy working environment.
Product Specification:
Voltage frequency: 380/50 (V/Hz)
Air handling capacity: 3000-6000 m3/h
Fan: 3.0w
Size: 1200 * 850 * 1600mm (customizable)
Equipment weight: 500-600 kg
Bearing capacity: 300 kg
Working principle:
The negative pressure generated by the fan enters the purifier through the side vent and the lower vent. The air flow enters the guide passage. After the collision between the large particle dust and the guide plate, the large particle dust falls into the ash collecting drawer under the action of gravity. The fine particle dust enters the filter chamber. The dust-containing gas passes through the filter core through the outer surface of the filter bag, and the dust is blocked by the filter core on its surface. When the blocked powder is blocked, the dust is blocked by the filter core. When the dust deposits continuously on the surface of the filter element, the filter element can be cleaned by manual dust cleaner or by impulse spraying to the filter cylinder so that the dust particles deposited on the filter element can be separated from the surface of the filter element and fall into the ash collecting drawer under the action of vibration, so that the whole surface of the filter element can be cleaned, and the purified air is discharged by the air duct and the fan.
Water filters and spark blockers:
A large spark blocker and two water filters are equipped in the label of the back-blown welding grinding and dust removal table, which can more safely prevent sparks and welding spatters of large particles.
This kind of worktable not only can effectively capture fine suspended dust but also does not interfere with workers'movement and vision. It is an ideal choice for small and medium-sized fine processing and irregular parts. It can be connected with a special smoke and dust purifier and a central smoke and dust system.