Shanghai single hydraulic press briefly described as follows (floor type hydraulic press XTM-107K)
Landing hydraulic machine _XTM107K using solid open type structure of welding finishing, C and bow, has the most convenient operating space. Floor type hydraulic machine has different names in different industries, also called bow precision hydraulic machine, hydraulic press, electrical accessories, press machine, hydraulic pressure machine, hydraulic riveting equipment, plastic buttons. Stamping machine
Single column hydraulic press:
This series of machine is suitable for metal or non-metal parts stamping, forming, stretching, shaping and pressure assembly; the motor rotor and stator pressing, electronic connectors and electric parts pressing, glasses, locking and hardware parts pressing etc.;
Single column hydraulic machine product features
1 the pressure, stroke, dwell time and shut height can be stepless adjustment according to the demand, also can be designed as two speed (idling speed, pressure, slow) and can be adjusted at will within the stroke speed and time;
2 another optional additional force sensor and display, to accurately display the situation of the product
Can be additionally added to the electronic ruler.grating ruler.display, accurate display of cylinder displacement, to achieve the desired purpose;
Single column hydraulic press product features:
1 with 2-20MPA liquid pressure as the power source, external three-phase 50HZ AC220 or three-phase 60HZ AC380V AC power supply.
2 to liquid as the medium to transmit energy, the use of imported low noise gear oil pump.
3 the force sensor is used to measure the pressure force directly. The precision is the positive and negative 5N. pressure signal control system. The digital signal transmission is used to ensure the accuracy of the sensor.
4 equipment standby, slide up and down when the noise is not more than 75 dB.
5 solid open structure, which can make the body maintain enough steel, and has the most convenient operating space,
6 manual and semi automatic control mode of the two, can be installed on the manual pressure die to stop at any travel range, equipped with emergency recovery button, equipped with infrared hand device.
The 7 series of press pressing stroke through the rotary encoder displacement is sent to the programmer, is automatically controlled by the compiled program.
8 the pressure, stroke, time of holding pressure, close the height of the customer can adjust on the touch screen.
9 hydraulic system of built-in rack, the appearance of clean, lightweight, stable.
10 the series of hydraulic machinery output is 5tf, that is often said 5 tons of force (1tf=1000kgf=9.8KN), but also can be customized according to customer requirements
Here is a picture of our single column hydraulic press (all customer live pictures