IMC magnetic drive centrifugal pump (hereinafter referred to as magnetic pump) is usually composed of motor, magnetic coupling and corrosion-resistant centrifugal pump. Its main feature is to use the magnetic coupling to transmit power without leakage. When the motor drives the outer magnetic steel of the magnetic coupling to rotate, the magnetic line passes through the gap and the isolation sleeve, acting on the inner magnetic steel, making the pump rotor and the motor rotate synchronously, without mechanical contact to transmit torque. At the power input end of the pump shaft, because the liquid is enclosed in the static isolation sleeve, there is no dynamic seal. So there is no leakage. IMC series magnetic pump is a new type of leakage free and corrosion-resistant pump developed by the joint design group of magnetic pump. Its technical and economic indexes are equivalent to those of similar products at the end of 1980s. The form and basic parameters of CQB series magnetic pump are equivalent to JB / t7742-95 "small magnetic drive centrifugal pump", which conforms to the enterprise standard of Q / btb01-2001 "magnetic drive centrifugal pump". IMC series magnetic pump is suitable for petroleum, chemical, pharmaceutical, electroplating, environmental protection, food, film and television printing, water treatment, national defense and other industries. It is an ideal equipment for conveying flammable, explosive, volatile, toxic, rare, valuable and various corrosive liquids. CQB series magnetic pump is suitable for conveying suction pressure not more than 0.2MPa, working pressure not more than 1.6Mpa, temperature not more than 120 ℃. The density is not more than 1600kg / m3, and the viscosity is not more than 30 * 10-6m2 / s without hard particles, fibers and liquid containing magnetic substances. Imc-g high temperature magnetic pump delivers liquid without hard particles and fibers whose pressure is not more than 1.6Mpa, temperature is not more than 350 ℃, and viscosity is not more than 30 * 10-6m2 / s. When the transmission medium system pressure is greater than 1.6Mpa, Bono pump valve company can carry out special design and manufacture.
Please call us if you are interested. The price is not true