matters needing attention:
1): this series of products can only be used for the purification of welding fume. If the humidity is too high, the dust will harden on the wall of the filter, which will affect the purification efficiency of the purifier;
2): clean the dust on the filter regularly to keep the air flow unobstructed;
3): clean the dust in the suction arm regularly to keep the air flow unobstructed;
4): maintain the fan regularly to extend its service life;
5): pay attention to the loss of the filter at any time, and replace the filter fiber in time;
6): replace the sealing parts for connection in time to prevent the aging of the sealing parts from affecting the work;
7): clean the dust in the dust collection drawer in time to avoid affecting the operation of the machine due to the excessive accumulation of dust.
Operation instruction and maintenance of single pulse dust collector
1. Syd mobile welding fume dust remover is installed near the mechanical equipment generating dust. According to the size of the upper air inlet of the dust remover, the user can configure the metal or plastic pipe and dust suction hood by himself (it can also be designed by the manufacturer).
2. Before the operation of single pulse dust collector, check whether the access door and flange connections are sealed to avoid air leakage and reduce the dust removal effect.
3. The dust remover is 380V, which can be used after the power supply is on the wire street outside the dust remover. During the first operation, pay attention to the rotation direction of the fan (if it is reversed, it is necessary to change the power wiring)
4. The cover of the dust remover control cabinet shall not be opened at will in the working room. If it is necessary to adjust the dust cleaning time or repair the circuit, it shall be stopped or cut off the power supply.
5. Adjust the timing of dust removal according to the dust properties and dust concentration.
6. The dust cover is the key part to ensure that the dust remover is in the state. The user shall connect the dust cover according to the external dimension of the processing parts and the nature of the dust, and make the ideal dust cover according to the principle of close, close and convenient design of the dust cover.
Product introduction:
The mobile welding fume machine for workshop is a portable and efficient dust remover designed for the treatment of smoke, dust and oil mist generated in the welding operation of mechanical processing plant, automobile assembly plant, maintenance plant and related industries. It is suitable for the smoke and dust generated in the production process of various welding, polishing and polishing, and chemicals. The operator has been in the high concentration smoke, dust smoke and oil mist ring for a long time Work in the environment, inhalation of excessive toxic substances, will cause adverse reactions, in this context came into being