Precautions for welding fume purifier:
1. Move the welding fume purifier to the middle to be welded, and place the suction arm cover 30 cm above the welding point;
2. Check whether all connecting parts can be connected stably;
3. Check the air tightness of the whole connection between the welding fume purifier and the pipeline, and remove the air leakage;
4. Connect the AC380V power supply and ground it. Before operation, pay attention to the rotation of the motor. Press the start button (on / off) on the control panel to start the welding fume purifier. The running light of the fan will be on, so that the dusty gas can pass through the welding fume purifier, and the equipment is equipped with normal tasks.
Product introduction:
The effect of mobile single and double arm welding fume purifier on the treatment of welding fume exhaust gas smoke, smoke through the negative pressure generated by the welding fume purifier is inhaled by the suction hood, enters the chamber through the flexible suction arm, the flow rate slows down, so that the dust with large particle diameter falls down, and the air flow containing fine dust enters the purification room, and the dust filtration and separation are completed in the purification room through the separation of the filter cartridge. Smoke The dust is blocked on the surface by the filter element, and the purified air is discharged by the fan. When the blocked dust is continuously deposited on the surface of the filter element, the filter cartridge shall be taken out regularly and cleaned manually.
Smoke hazard:
Welding fume is a kind of fume produced in the process of welding and when the electrode contacts with the weldment under the condition of high temperature combustion. This kind of fume contains manganese dioxide, nitrogen oxide, fluoride, ozone, etc. floating in the air will cause harm to human body. People work in this kind of high smoke environment for a long time. After inhaling a lot of smoke, it will cause dizziness, headache, cough, chest tightness, shortness of breath and other symptoms. Serious can lead to smoke poisoning or pneumoconiosis.
Equipment features: 
The equipment is equipped with universal casters, which can be flexibly moved in any position of the plant. The dust removal rate is high without the restriction of the dust source. The clean air discharged after treatment can be directly circulated and played in the workshop. The flexible single suction arm can hover at any position in the three-dimensional space. The 360 degree can easily and flexibly reach any position. The operation is simple, and easy to clean and maintain. It can be researched according to the special requirements of customers Make customized