Introduction:
The grinding and dedusting work table is designed as a whole with fan, motor, filter unit and work table. It has compact structure, smaller floor area and low noise after noise reduction treatment. Perfect automatic control system, easy to operate.
The grinding table is completely humanized design, and can be designed, manufactured and prepared with other accessories according to the actual work needs of customers;
According to the characteristics of the workpieces, the side plates of the worktable are designed as open type and closed type;
It can also be designed as down draft or side draft according to the actual working conditions.
　　
Features of grinding table:
1. In order to prevent noise pollution of grinding table, noise reduction measures shall be taken for fans. 　
2. It integrates the working table and dust removal function, and directly removes the dust at the source of dust generation. 　
3. The grinding table has compact structure, small floor area, and can work at two or more stations at the same time. 　　
4. Filter media can be selected according to the nature of dust to be treated by users, so as to meet the removal of dust with different properties.  
5. The filter cartridge has long service life, stable performance and convenient replacement. 　　
6. There are air inlets at the bottom, front and top of the worktable, which can effectively control dust dispersion.  
7. The grinding table is equipped with a new type of low-noise fan, with constant air suction and lower noise. It can guarantee the physical and mental health of operators.
working principle:
Under the suction of centrifugal fan, the dust enters the purification and dedusting workbench, the large particle dust enters the outer wall of dust collection through gravity settlement, and the clean gas is discharged into the surrounding air through the fan, so that the dust gas can be effectively purified.
Hazards of grinding dust:
Grinding dust! The main culprit of pneumoconiosis: after the general dust enters the human lung, it may cause various kinds of pneumoconiosis. Some non-metallic dust, such as silicon, asbestos, carbon black, etc., will become silicosis, asbestosis or pneumoconiosis because it cannot be eliminated after absorbing human body. In the drawer, when a small part of the remaining small particle dust passes through the filter cartridge of the cleaning and dedusting working table, the dust that is blocked in the filter cartridge, such as the dust containing free silica, will deposit in the alveolus, which will cause fibropathy, make the lung tissue harden and lose the respiratory function, and cause silicosis (silicosis) lung disease.
Application: all kinds of welding, polishing, grinding, deburring, plasma cutting, etc.
Advantage:
Compact structure, small size, can be very convenient to move to any place where work is required.
Filter media can be selected according to the nature of dust treated by users to meet the removal of dust with different properties.
The baffles on both sides of the worktable can be opened to adapt to different sizes of workpieces.
Equipped with high-performance worm fan, it has large air suction and super suction. Fully enclosed fan room, low noise operation, can
Dust removal table is a kind of industrial environmental protection equipment. It integrates the working table and dust remover. When grinding, polishing and welding operations are carried out on the table, the smoke and dust generated are sucked and purified by the dust collection device below. The purified air can be directly discharged into the workshop for recycling, so as to ensure the physical and mental health of the operator.
Pulse back blow cleaning:
Pulse back blowing cleaning system is an effective way to clean the filter cartridge. This system can make the filter cartridge life longer than traditional cleaning! The blowback cleaning switch is on the front of the equipment, and the cleaning process only takes 2 minutes