Klae-c600e filter cartridge
Colin Aier filter element klae-t600e filter element Colin Aier filter element klae-a600e filter element Colin Aier filter element klae-c800e filter element Colin Aier filter element klae-t800e filter element Colin Aier filter element klae-a800e filter element
【5】
The domestic brand filter elements of our company are all self-made alternative filter elements. The filter materials are imported from HV company of Germany, with the registered trademark of "Jiajie". Other brands involved in our company have no brand significance, but are only used as model reference and use reference.
Hangzhou Jiajie Electromechanical Equipment Co., Ltd
Kelin filter element klae-c35e klae-t35e klae-a35e
Kelin filter element klae-c70e klae-t70e klae-a70e
Kelin filter element klae-c100e klae-t100e klae-a100e
Kelin filter element klae-c150e klae-t150e klae-a150e
Kelin filter element klae-c200e klae-t200e klae-a200e
Kelin filter element klae-c300e klae-t300e klae-a300e
Kelin filter element klae-c350e klae-t350e klae-a350e
Kelin filter element klae-c400e klae-t400e klae-a400e
Kelin filter element klae-c600e klae-t600e klae-a600e
Kelin filter element klae-c800e klae-t800e klae-a800e
Maintenance:
1. The core component of precision filter is filter element, which is easy to be damaged and needs special protection.
2. When the precision filter works for a long time, it will cut off a certain amount of impurities, which will reduce the working speed, so it is necessary to clean it frequently and clean the filter element at the same time.
3. In the process of cleaning, pay special attention to the cleaning of filter element, and do not deform or damage it, otherwise the filtering accuracy will be reduced and the production requirements will not be met.
4. If the filter element is deformed or damaged, replace it immediately.
5. Some precision filter elements cannot be used repeatedly, such as bag filter element, polypropylene filter element, etc;
matters needing attention:
1. The filter is configured according to the principle of "coarse first, then fine", and the order cannot be reversed.
Precision filter configuration
2. The actual compressed air flow, pressure and temperature through the filter shall not exceed the specified value.
3. Pay attention to the inlet and outlet positions of the filter during installation.
4. The filter shall be installed vertically. A certain height from the ground is reserved for easy replacement of filter elements.
5. In case of any of the following conditions, the filter element shall be replaced:
a. The effect of the filter was deteriorated obviously;
b. The indicated value of differential pressure is more than 0.07MPa; (Note: initial pressure of filter element