It is a very important operation for the material to be discharged from the pot when using the mezzanine pot to boil the material. There are vertical and tilting installation methods for mezzanine pot. If the vertical mezzanine pot is used for discharging materials, there is a discharge port at the bottom of the vertical mezzanine pot, which flows out from the discharge port. If it is block material, it needs to be salvaged manually. When the tilting type mezzanine pot is used for discharging materials, the tilting mezzanine pot is equipped with a worm and a hand-operated worm and the body of the pot is rotated to 90 degrees, and all the materials in the pot are poured out. Mezzanine pot is a good choice for cooking equipment because of its simple operation and short cooking time.
Purpose and characteristics
1. Application: stainless steel sandwich pot, also known as sandwich steam pot, is widely used in food processing such as candy pharmacy, dairy wine, pastry, beverage, preserved fruit, can, etc. it can also be used in large restaurants or canteens to cook soup, cook vegetables, stew, cook porridge, etc. it is a good equipment for food processing to improve quality, shorten time and improve working conditions.
2. Features: the boiler takes the steam at a certain pressure as the heat source and can be electrically heated. It has the characteristics of large heating area, uniform heating, short boiling time of liquid and easy control of heating temperature.
The inner layer of the pot (inner pot) is made of acid resistant and heat-resistant austenitic stainless steel, equipped with pressure gauge and safety valve, with beautiful appearance, easy installation, convenient operation, safety and reliability.
3. Basic structure and installation
1) . overall structure:
The fixed type (vertical type) is mainly composed of the pot body and the legs; the fixed type (vertical type) is mainly composed of the pot body and the legs, and the agitator; the tiltable type is mainly composed of the pot body and the tiltable installation; the tiltable type is mainly composed of the pot body tiltable device and the agitator;
2) . tighten the two set screws on the bracket. When rotating the pot body, the inlet pipe and outlet pipe at both ends are not allowed to rotate with the pot.
3) . after installation, the agitated steamer shall be put into operation after the empty car test run inspection and the rotating parts are in normal operation.
4) . after steam admission, if the joint leaks, screw the nut until it does not leak