Zongzi pot has many advantages for the cooking of zongzi. Shorten cooking time: use zongzi pot to cook zongzi. It only takes less than two hours for one pot, which greatly shortens working time. Large output, to meet market demand: a conventional model of zongzi pot can produce thousands of zongzi in one pot, but also can be used in multiple sets. In traditional cooking method, at least one person is required to keep one pot and ensure the proper temperature. When the pot is cooking, one person can operate more than one, and the automatic control system can control the cooking, saving time and labor.
Classification:
1. According to the heating mode, it can be divided into electric heating cooking pot and steam heating cooking pot
2. Divided into: vertical cooking pot
Precautions for use of steam cooker
1. The steam pressure shall not exceed the rated working pressure for a long time.
2. When entering steam, slowly open the steam inlet valve until the pressure is required. If the stop valve at the condensate outlet is equipped with a steam trap, always open the valve; if there is no steam trap, first open the valve until there is steam overflow, then close the valve, and keep the opening degree until there is a small amount of water vapor overflow.
3. The safety valve can be adjusted according to the pressure of steam used by the user.
4. In the process of using the steam boiler, it is necessary to pay attention to the change of steam pressure and adjust it timely with the steam inlet valve.
5. After stopping the air intake, open the straight tap at the bottom of the pot and drain the remaining water.
Maintenance
1. In case of steam leakage at the inlet and outlet pipe joints, if the problem is not solved by tightening the nuts, the filler shall be added or replaced.
2. The pressure gauge and safety valve shall be inspected regularly, and if there is any fault, they shall be replaced and repaired in time.
3. After the boiler has been used for 5 years, it is recommended to carry out safety hydrostatic test, and the interval of hydrostatic test in the future shall be in accordance with the requirements of local technical departments