Steel wire binding machine - prestressed steel strand through hole professional manufacturers preferred Shandong hengwang
First, the use of:
Steel wire binding machine (referred to as the penetration hole of prestressed steel strand in cable), is composed of mechanical transmission, transfer roller clamping steel strand, can enter, can back, can be a continuous conveyor, can also move the transmission, conveying speed of steel strand with stepless speed regulation, convenient operation, reliable performance, efficiency significantly. The machine greatly reduces the labor intensity, wear beam machine Jining hengwang mining equipment Co. Ltd production are widely used in large bridges, girders and structures. Is ideal for the construction machinery, in the construction of bridges and large buildings with prestressed work in the main tool for the channel steel wire.
Two, technical parameters:
1, steel wire diameter of 14- of 16: General (according to the user needs to configure)
2, conveying distance: m 40-200
3, motor power and input speed: 4.0KW 5.5KW 7.5KW 3.0KW according to the needs of optional
4, the size of the whole machine: long 64CM * width 44CM * high 24CM
5, the weight of the whole machine: 150 kg
Three, working principle:
Double speed reducer drives the driving wheel to rotate, steel wire inserted from one end of the inlet, along the catheter into the reserved channel driving wheel and double wheel pressed steel hinge line bundle to move forward, until the channel from out of the other end to tension in size.
Four, the main features:
Steel wire binding machine can retreat, can be fast or slow, small volume, light weight, simple operation, convenient maintenance, in the construction process, two people can complete the operation, greatly reduce labor intensity, improve production efficiency.
Five, the use of methods:
1, the preparation before the start
(1) check the electrical wiring is intact, check the oil plane position within the reducer.
(2) check the motor to move direction, whether it is in accordance with the direction of the arrow on the case.
(3) switch on the power supply, and the positive and negative rotation is determined.
2, normal work
(1) insert the steel wire to lay the shelf into the line from the machine, to move into the line button switch, the steel hinge line slowly into the machine, along the catheter into the ducts to the other end out of reach reserved tension size, cut off by a hand-held sand turbine.
(2) when not up to the transmission distance, adjustable wheel pressure spring screw machine cluster meeting the requirements of the job, but can not be adjusted too tight, so as not to aggravate the wear of roller operation, reduce the service life.
(3) work, pay attention to the operation is normal, when the discovery of any failure, should be immediately shut down, to identify the cause of the trouble after the start of troubleshooting.
Six, maintenance:
1, regularly check the wear of the steel strand in the machine, the lubricating oil and the press wheel wear, the pressure wheel adjustment is not up to the level of use, should be replaced in a timely manner.
2, after each use, the steel wire binding machine should be placed in a dry environment in the rain and snow.
Contact: Zhang Fan
WeChat: 15589713226
.
Tel: 0537-2676996 phone: 15589713226 QQ:288124885