QBY stainless steel pneumatic diaphragm pump product overview:
QBY type stainless steel pneumatic diaphragm pump is a new type of transport machinery, is one of the most innovative pump. Air compressor using compressed air as power source, for all kinds of corrosive liquid, with particles of liquid, high viscosity, volatile, flammable, highly toxic liquid, can be pumping light suction. Three kinds of materials, aluminum alloy, cast iron, stainless steel. According to different liquid media, the diaphragm pump is made of rubber, butadiene rubber, fluorine rubber, ptfe. In order to meet the needs of different users. Since the operation of the pump, has been more than 1 thousand domestic petroleum, chemical, electronics, ceramics, textile, paint, pharmaceutical machinery system unit uses, placed in special occasions, for pumping various conventional pumps can not pump the medium, ideal products and replace the gear pump, all obtained satisfactory results.
- QBY stainless steel pneumatic diaphragm pump type meaning:
- QBY stainless steel pneumatic diaphragm pump technical parameters:
Flow: 0-30m3/h;
Head: 0-50m;
Diameter: 10-100mm;
Temperature: -15-+120;
Pressure: 0.1-0.7MPa;
Self suction height: 5-7m.
- QBY stainless steel pneumatic diaphragm pump features:
QBY stainless steel pneumatic diaphragm pump is a reciprocating diaphragm deformation caused by the volume change of volume pump, its working principle is similar to piston pump, because of the characteristics of pneumatic diaphragm pump working principle, so the pneumatic diaphragm pump has the following characteristics:
(1) the pump will not overheat: compressed air for power, in the exhaust is an expansion of heat absorption process, the temperature is lower when the pneumatic pump, no harmful gas emissions. 　　
(2) will not produce electric spark: pneumatic diaphragm pumps do not have electricity for power, grounding and then prevent the static spark
(3) liquid containing particles can be: because the volume of imports and working for the ball, so can not be easily blocked. 　　
(4) low shear stress on the material: how the work of breathing in how spit, so the smallest stir of materials suitable for the delivery of unstable substances (5) flow can be adjusted, the throttle valve can be installed to regulate the flow at the exit of materials. 　　
(6) self priming. 　　
(7) can be empty, and there will be no danger. 　　
(8) diving work. 　　
(9) the fluid can be transported very widely, from low viscosity to high viscosity, from the corrosion of the viscous. 　　
(10) no complex control systems, no cables, fuses, etc.. 　　
(11) small volume, light weight, easy to move. 　　
(12) without lubrication maintenance is simple and will not work environment pollution due to leakage. 　　
(13) the pump can always maintain high efficiency, and will not be reduced because of wear and tear. 　　
(14) one hundred percent of the energy is used, when the outlet is closed, the pump is automatically shut down, the device moves, wear, overload, and heat.
(15) without a dynamic seal, the maintenance is simple and easy to avoid the leakage. Work without dead