An overview of QBYF full liner fluorine pneumatic diaphragm pump:
QBYF full liner fluorine pneumatic diaphragm pump will be combined with the fluorine plastic pneumatic diaphragm pump and pneumatic diaphragm pump, so that the product can not only have the corrosion resistance of the plastic pump, the physical properties of the metal pump. Fluorine gas flow components of inner liner with PTFE diaphragm pump, which is suitable for transporting alkali, almost all organic solvents, the shell is made of high quality iron, sturdy and durable.
QBYF - full fluorine pneumatic diaphragm pump type meaning:
For example: QBYF-25
QBY- pneumatic diaphragm pump
F- full lining fluorine F46
25- import and export diameter (mm)
QBYF - full fluorine pneumatic diaphragm pump flow material:
QBYF - full fluorine gas note diaphragm pump:
1, ensure that the fluid contained in the maximum particle size does not exceed the maximum safety of the diaphragm through the particle diameter standard.
2, the intake pressure should not exceed the maximum allowable pump pressure, higher than the rated pressure of the compressed air can cause personal injury and property damage and damage to the performance of the pump.
3, to ensure that the pump pressure pipeline system can withstand the maximum output pressure to ensure that the drive system of the clean and normal working conditions.
4, electrostatic spark may cause the explosion caused the loss of personal casualty accident and property, according to the need to use a large cross-sectional area of the wire, the pump on the ground screw properly grounded.
5, grounding requirements in line with local laws and regulations and the requirements of the site of some special requirements.
6, tighten the pump and the connecting pipe joints, to prevent vibration, impact, rub to produce electrostatic spark. Use antistatic hose.
7, to periodically check and test the reliability of the grounding system, the grounding resistance is less than 100 ohm.
8, maintain good exhaust and ventilation, away from flammable and explosive and heat source.
9, the exhaust of the diaphragm may contain solids, do not exhaust port to the work area or person, so as not to harm the body.
10, when the diaphragm failure, the delivery of the material will be emitted from the exhaust muffler.
11, when the transport of flammable and toxic fluids, please put in a safe place away from the work area.
12, please use at least 3/8 "inner wall smooth pipe connection exhaust port and muffler.
13, the fluid pressure can cause serious casualties and property losses, do not pump pressure when any maintenance work of the pump and tube system, such as the need to do maintenance, the first cut off the pump inlet, pressure piping system pressure relief relief mechanism to open the bypass, the pipe joints slowly release the connection.
14, such as the transmission of harmful toxic fluid, please do not send the pump directly to the manufacturers to repair. Properly handled according to local laws and regulations.
15, part of the use of liquid delivery Aluminum Alloy material pump, please do not used to transport liquid containing Fe3+ and halogenated hydrocarbons and other halogenated hydrocarbon solvents, the pump will cause corrosion caused by burst.
16, to ensure that all the parts of the contact conveyor will not be transported fluid corrosion damage.
17, to ensure that all operators are familiar with the operation and use of the pump to control the use of safety precautions, if necessary, to ration the necessary protective equipment.
18, the correct use of the pump, does not allow the long time of the air transfer.
19, at work where the poor, such as construction sites, industrial wastewater discharge, due to impurities in the water and are complicated, easy to plug the pipeline, so the electric pump on the formation of excessive load, the electrical heating vulnerability, spindle fracture