DBY stainless steel electric diaphragm pump is a new type of chemical pumps, in recent years, due to a breakthrough in the membrane material, more and more international industrialized countries adopt this type of pump, replace part of centrifugal pump, screw pump, used in petrochemical, ceramics, metallurgy and other industries.
DBY-P stainless steel electric diaphragm pump product features:
One, QBY stainless steel electric diaphragm pump does not need irrigation water, self absorption capacity of more than 3 meters.
Two, through the good performance, the diameter of 10 mm in the following particles, mud, etc. can be effortlessly through.
Three, due to the diaphragm will be transported medium and transmission mechanical parts separately, so the media is absolutely not outward leakage. And the pump itself, no seal, greatly prolong the service life of. According to different media, the diaphragm is divided into chloride butyl rubber, fluorine rubber, butyl rubber, etc., can meet the requirements of different users.
Four, electric diaphragm pump body media flows through the part, according to user requirements, is divided into cast iron, aluminum alloy, stainless steel, rubber lining, lining fluorine, the motor is divided into ordinary type and explosion-proof type two.
Note the use of DBY-P - stainless steel electric diaphragm pump:
1, ensure that the fluid contained in the maximum particle size does not exceed the maximum safety of the pump through the particle diameter standard.
2, electrostatic spark may cause the explosion caused the loss of personal casualty accident and property, according to the need to use a large cross-sectional area of the wire, the pump on the ground screw properly grounded.
3, grounding requirements in line with local laws and regulations and the requirements of the site of some special requirements.
4, tighten the pump and the connecting pipe joints, to prevent vibration, impact, rub to produce electrostatic spark. Use antistatic hose.
5, to periodically check and test the reliability of the grounding system, the grounding resistance is less than 100 ohm.
6, maintain good exhaust and ventilation, away from flammable and explosive and heat source.
7, when the transport of flammable and toxic fluids, please put in a safe place away from the work area.
8, please use at least 3/8 "inner wall smooth pipe connection exhaust port and muffler.
9, the fluid pressure can cause serious casualties and property losses, do not pump pressure when any maintenance work of the pump and tube system, such as the need to do maintenance, the first cut off the pump inlet, pressure piping system pressure relief relief mechanism to open the bypass, the pipe joints slowly release the connection.
10, such as the transmission of harmful toxic fluid, please do not send the pump directly to the manufacturers to repair. Properly handled in accordance with local laws and regulations, and use the AUFINE company to ensure the life of pure accessories.
11, part of the use of liquid delivery Aluminum Alloy material pump, please do not used to transport liquid containing Fe3+ and halogenated hydrocarbons and other halogenated hydrocarbon solvents, the pump will cause corrosion caused by burst.
12, to ensure that all the parts of the contact conveyor will not be transported fluid corrosion damage.
13, to ensure that all operators are familiar with the operation and use of the pump to control the use of safety precautions, if necessary, to ration the necessary protective equipment.
14, the correct use of the pump, does not allow the long time of the air transfer.
15, at work where the poor, such as construction sites, industrial wastewater discharge, due to impurities in the water and are complicated, easy to plug the pipeline, so the electric pump on the formation of excessive load, the electrical heating vulnerability, spindle fracture