Type selection and characteristic performance of heating reactor with clamp sleeve
The reactor is a typical main chemical production equipment in the reaction, resin, adhesive (glass glue, white latex, etc.) are widely used in paint, silica gel, lithium batteries and other chemical products production. Through mixing, heating and cooling, a variety of materials are dispersed and mixed, and the reaction polymerization is carried out. The structure is composed of a kettle body, a transmission device, a stirring device, a heating device, a cooling device and a sealing device. Auxiliary auxiliary equipment: fractionating column, condenser, water separator, collecting tank, filter and so on. You can make a reasonable configuration of the amount of processing, equipment, specifications, or the nature of the materials you need to be processed. Reactor series: Zhejiang reactor, stainless steel reaction kettle, electric heating reactor and jacket | outer tube | pipeInner tube reactor, small reactor, laboratory reactor, multifunctional reactor, dispersing reactor, stirring kettle, kettle, kettle, vacuum emulsification pyrolysis reactor, reaction kettle, fat tree unsaturated resin reaction kettle, epoxy resin, phenolic resin autoclave reactor, reactor, 107 polyurethane glue, 108 glue autoclave reactor, PU reactor, white latex glue adhesive reactor, reactor, reactor, emulsion acrylic emulsion reactor, wall paper adhesive reactor, reactor, pressure sensitive adhesive dry hanging marble glue reactor, reactor, reactor, building glue glue civilian reactor, reactor structure, AB glue reactor, reaction kettle, paint sealant coating, silica gel | reactor reactor etc.. Technical parameters: design volume: 50L-35000L (volume can be designed as required. )
Reaction temperature: normal temperature to 300 C or higher, depending on the working condition. Reaction pressure: 0.001-0.8Mpa.
Equipment material: SUS304 stainless steel, SUS321 stainless steel, SUS316L stainless steel or Q235-B carbon steel.
Mixing form: blade type, anchor paddle type, frame type, screw belt type, turbine type, dispersed disk type, combined type, etc.
Heating mode: electric heating, steam heating, water bath heating. Heat conduction medium: heat conduction oil, steam, hot water and electric heating.
Transfer structure: jacket, outer tube, inner tube.
Stirring speed: stirring speed depending on the choice of material mixing of liquid material selection; conventional polymerization speed is 63-85r/min; containing powder material mixed with the liquid needed to achieve the dispersion effect, speed of 0 - 1500r/min; oil containing two kinds of liquid and liquid or mixed incompatible to achieve the emulsification effect, speed 0 - 2800 r/min.
Structure performance: the equipment is mainly composed of three parts, the tank, the jacket and the mixing system.
1, the stainless steel reaction kettle material: the material contact with the material are made of 304 or 316L and other high quality stainless steel, which conforms to the GMP standard.
2, reaction kettle parts:
1) the stirring mode of reactor is mostly anchored and slurry stirring to ensure that the material is evenly distributed in a short time. At the same time, frame type, anchor type, slurry type and so on can be selected according to the need.
2) the seal of the reactor is sealed with a sanitary mechanical seal / packing seal, which can guarantee the pressure in the tank and prevent the leakage of the material in the tank and cause unnecessary pollution.
3) the interface of the reaction kettle adopts the ISO standard fast loading hoop type, which is convenient for health.
4) reaction kettle aseptic respirator, CIP cleaning nozzle, view mirror, flange, fast opening manhole, etc.
3, the surface treatment of reactor. The mirror is polished on the inner surface to ensure that there is no sanitary corner. The fully closed design ensures that the material is always in sterile state, and the outer surface can be sandblasting, frosting and primary cold-rolled cold rolling.
4, the heating and cooling way of the reactor is heating mode, which is equipped with steam, electric heating and heat conducting oil to meet the technological needs of different working conditions, such as acid resistance, alkali resistance, high temperature resistance, abrasion resistance and corrosion resistance.