Specification for PP odor gas spray tower, water spray absorption tower
Working principle
The device adopts sodium hydroxide solution to absorb and neutralize liquid to purify waste gas. The gas is pressed into or sucked into the air passage by the centrifugal fan, and then flows upward to the first filling layer. After absorption of the exhaust gas continues to flow upward to the second level of the filler layer, and liquid contact with the second stage nozzle, again reacted according to the indicators of exhaust gas, can be equipped with third filler and spray device, gas purification standards through the mist is discharged into the atmosphere.
PP - spray tower is a new type of industrial waste gas treatment equipment. The utility model is produced on the basis of the improvement of the industrial waste gas purifier of the floating filler layer, and is widely used in the pretreatment of industrial waste gas treatment, dust removal, etc..
The PP spray tower itself contains a body, a filling layer, a mist layer, a circulating water spray pipe, a circulating water tank, etc..
The main body of the PP spray tower comprises a waste gas inlet, an outlet, a window, a maintenance hole and a structure used for supporting and fixing inside the PP spray tower, so as to ensure the corrosion resistance of the PP exhaust spray tower to increase its service life.
Principle and structure of PP spray tower
PP spray tower is an advanced technology products of environmental protection technology, the role of PP spray tower is to remove impurities in the gas with solvent reaction, can be used to produce a variety of gases needed to wash the industry. Waste gas into the tower, the tower is in full contact with the washing liquid, can remove impurities and purify gas effect. Itself contains a body, the filling layer, the mist layer, the circulation of water pipes, and circulating water tank, etc..
The main body of the PP spray tower comprises a waste gas inlet, an outlet, a window, a maintenance hole and a structure used for supporting and fixing inside the PP spray tower, so as to ensure the corrosion resistance of the PP exhaust spray tower to increase its service life.
Features: PP spray tower of low noise, stable operation, simple operation, convenient for acid gas; professional electroplating industry and more than and 5 surface treatment produced by neutralization treatment, using high quality PP plate, the air volume can be adjusted with random.
Location application
The equipment itself includes a body, a filling layer, a mist layer, a circulating water spray pipe, a circulating water tank, etc..
Spray tower body
The main body of the spray tower comprises an exhaust gas inlet, an outlet, a window, a maintenance hole and a structure used for supporting and fixing in the spray tower, so as to ensure the corrosion resistance of the equipment to increase the service life of the equipment.
Fill layer
Used for 75 Raschig rings, as the spray tower filling material, the material is PP.
For 75 PP Raschig ring with a large surface area, low loss, low height and material transfer characteristics, compared with the filling materials use for 75 PP Raschig rings have higher processing efficiency and low cost of operation