PP mist spray tower exhaust, malodorous gas spray tower parameters
Device description;
As a new type of spray absorption equipment, it has been widely used in the purification of waste gas. The concept of fluidized bed is developed to the vapor liquid mass transfer equipment, so that the packing in the spray tower is in the state of fluidization, so that the mass transfer process can be enhanced. Its characteristics are: high gas velocity, large capacity, light weight, relatively uniform distribution of liquid vapor, not easy to be blocked by solid and viscous materials. Especially since the column turbulence strongly, so the quality and energy transfer can be enhanced, which can greatly reduce the tower diameter, reduced height. The tower volume is large, empty tower gas velocity of 1.5 ~ 6.0m/s, 20 ~ 110m3/ spray density (M2 - H), the pressure loss of 1500 ~ 3800Pa, the fog device adopts a swirl plate demister in the washing tower, the gas produced by plate rotation, using centrifugal force to remove mist in addition, the separation efficiency can reach 98%-99%, and has the advantages of simple structure low pressure drop.
Inspection and maintenance content:
1: remove the surface dust, dirt.
2: spray head, with or without clogging.
3: clean up the tank with no precipitation blockage, and clean up the record, easy to customize the next cleaning time.
4: To observe the Raschig ring surface might be heavier stains, if required to take place in large area water tank with a neutralizing agent to remove surface stains.
5: according to exhaust odor or data to determine whether or not to replace activated carbon, activated carbon can be used in the sun exposure, so that renewable.
6: check whether there are abnormal water pump, loose and plug.
Exhaust exhaust gas purification tower Sunyata environmental SYD series are widely used in chemical, pharmaceutical, oil and other industries in the production process, waste gas, exhaust gas (such as hydrogen fluoride, sulfur dioxide, hydrogen chloride, chlorine, hydrogen sulfide, nitrogen oxides, acid mist etc.), washing, spraying, washing, absorption, neutralization, foam, dry, take off in addition, fog, processing and purifying column purification system, with advanced design, reasonable and novel, the gas-liquid separation of full and thorough absorption, absorption and purification of equal section area, better effect, according to the "national air pollutant emission standards" (GB16297-1996) regulations, according to the different media, our company by washing and packing cyclone, organic adsorption, absorption, purification and more advanced wave absorption and purification system, according to different requirements of purification rate is 80% ~ 99.8%. The absorption and purification of exhaust gas. Specifications and technical specifications