A plurality of welding machine grinding dedusting equipment, grinding exhaust table manufacturers
Negative pressure dust generated by the fan polished table surface into the purifier, air flow into the diversion channel, large particles of dust and the plate after the collision, large particles of dust under the action of gravity falls into the dust collecting drawer, dust containing fine particles into the filter chamber, the outer surface of the bag through the filter, filter dust is blocked in the when the surface is blocked the dust in the filter surface continuously deposited by manual cleaning, cleaning the filter, but also by the pulse jet cartridge of ash, the deposition of dust particles in the filter on the surface of the filter from fallen into the dust collecting drawer in under the action of vibration, the whole surface of the filter core cleaning, cleaning after the air from the air duct, the fan discharge.
Specification for dust cleaning table:
Air flow m3/h power KW voltage frequency V/Hz size mm weight Kg carrying capacity Kg
20001.5 380/50 1000*1200*1600 300200
30003 380/50 1000*1200*1600 300200
Note: the size and function of the equipment can be customized according to customer requirements and the size of the workpiece grinding.
Installation notes;
The filter should be firmly installed, to ensure close contact with the inner wall of the box body filter pad, to avoid leakage, influence the equipment performance.
Common problems and maintenance;
L, should be used in a solid flat ground, to avoid the noise caused by the shaking machine.
2, avoid the rain or use in humid environments.
3, the machine failure, should immediately turn off the power, will be removed after the workpiece inspection.
4, replace the filter must turn off the power supply.
5, the use of the machine, should pay attention to the power supply voltage and the machine is consistent, do not use a socket with other appliances.
6, the opening and closing of the equipment must be carried out in accordance with the provisions of the operation is strictly prohibited illegal operation, to prevent damage to electrical components.
7, when moving or handling machine, the machine should not exceed 45 degrees tilt.
8, the use of the machine should pay attention to the space reserved not less than 50-100cm.
9, the equipment is simple, in the control panel of the equipment has been used in intelligent design, open the power switch can work, after the operation is completed, turn off the power switch.
Our company specializes in the design of personnel engaged in air purification treatment field has more than and 10 years of experience in grinding dust purification technology in the field has accumulated a wealth of practical experience, to ensure the advanced nature, practicality and reliability of the lock product design technology. All the purification equipment made by the company has independent intellectual property rights, and always maintain the leading domestic level