Wheel dust hood, polishing workshop dust removal what are the advantages?
Motor power: 2.2KW
Voltage frequency: 380/50 (V/Hz)
Dimensions: 1200*850*1600mm
Scope of application: all kinds of welding, polishing, polishing and deburring, plasma cutting, etc..
Installation notes;
The filter should be firmly installed, to ensure close contact with the inner wall of the box body filter pad, to avoid leakage, influence the equipment performance.
Common problems and maintenance;
L, should be used in a solid flat ground, to avoid the noise caused by the shaking machine.
2, avoid the rain or use in humid environments.
3, the machine failure, should immediately turn off the power, will be removed after the workpiece inspection.
4, replace the filter must turn off the power supply.
5, the use of the machine, should pay attention to the power supply voltage and the machine is consistent, do not use a socket with other appliances.
6, the opening and closing of the equipment must be carried out in accordance with the provisions of the operation is strictly prohibited illegal operation, to prevent damage to electrical components.
7, when moving or handling machine, the machine should not exceed 45 degrees tilt.
8, the use of the machine should pay attention to the space reserved not less than 50-100cm.
9, the equipment is simple, in the control panel of the equipment has been used in intelligent design, open the power switch can work, after the operation is completed, turn off the power switch.
Working principle：
Smoke and dust through the negative pressure generated by the blower through the air outlet into the purifier, the airflow into the diversion channel, large particles of dust and the plate after the collision, large particles of dust under the action of gravity falls into the dust collecting drawer, containing small particles of the air into the filter chamber, the outer surface of the filter drum through the filter, dust filter is blocked on the surface. The dust is blocked in the filter surface deposited continuously, to a certain extent, through the manual cleaning machine to clean the filter, but also by the pulse jet cleaning dust on the filter cylinder, the deposition in the dust particles on the surface of the filter in the compressed air under the impact from the surface of the filter core into the dust drawer, the filter the surface cleaning, the purified air through the fan discharge.
Packing list
1 sets of dust removal work table equipment; product specification set of 1; certificate.
The device is simple to operate, the system control panel on the device, the panel has been used in intelligent design, the operator only need to control the switch can be