The design process and principle of Huaian casting grinding table
Sunyata environmental protection equipment (Qingdao) Co. Ltd is a professional production of various kinds of air purification equipment, mobile welding smoke purifier, welding smoke purifier, fume purification, waste gas treatment equipment, deodorizing equipment, organic waste gas treatment device, cartridge filter, dust removal equipment, lathe oil mist purifier, oil mist purifier kitchen oil mist collector, oil mist filter, oil mist purifier purification equipment industry.
Grinding table features
1, the worktable wind speed 1m/s~1.5m/s, to ensure that the welding smoke, cutting dust, etc. can be absorbed treatment, nothing more than.
2, the filter cartridge, the same air volume than the bag covers an area of smaller, and the filtration efficiency of up to 99.5% above.
3, automatic pulse injection, not only to ensure the effect of dust treatment, but also to minimize the damage to the filter cartridge to extend the service life, each spray using 108 liters of 0.6Mpa compressed air.
Product introduction
Negative pressure dust produced by the blower through the side outlet and the lower air outlet enters the purifier, air flow into the diversion channel, large particles of dust and the plate after the collision, large particles of dust under the action of gravity falls into the dust collecting drawer, dust containing fine particles into the filter chamber, dust containing gas from the outer surface of the bag through the filter. The dust filter is blocked on the surface to be stopped when the dust in the filter surface when deposited by manual cleaning machine cleaning filter, but also by the pulse jet cartridge to please the deposition in the filter on the ash dust particles from the surface of the filter core in the vibration under the action of fallen into the dust collecting drawer. The whole surface of the filter core can be cleaned and purified by the air duct and the fan discharge.
The unique design of the desktop is perfect, the four winds, built-in dust removal system, fan sound insulation, no pipeline connection, clean air can be recycled in the room, reducing energy expenditure.
The workbench can effectively capture the small suspended dust without interfering with the movement and vision of the workers, and is an ideal choice for medium and small fine processing and irregular parts. The utility model can be connected with a special smoke purifier, and can be connected with a central smoke system