Xingtai polishing dust remover purification equipment casting spot
Working principle：
Smoke and dust through the negative pressure generated by the blower through the air outlet into the purifier, the airflow into the diversion channel, large particles of dust and the plate after the collision, large particles of dust under the action of gravity falls into the dust collecting drawer, containing small particles of the air into the filter chamber, the outer surface of the filter drum through the filter, dust filter is blocked on the surface. The dust is blocked in the filter surface deposited continuously, to a certain extent, through the manual cleaning machine to clean the filter, but also by the pulse jet cleaning dust on the filter cylinder, the deposition in the dust particles on the surface of the filter in the compressed air under the impact from the surface of the filter core into the dust drawer, the filter the surface cleaning, the purified air through the fan discharge.
parameter
Air volume: 2400m3/h
Motor power: 2.2KW
Voltage frequency: 380/50 (V/Hz)
Dimensions: 1000*1200*1600mm
work environment
The polish is refers to in the coating process, with sandpaper, pumice, fine powder friction friction medium coated or film surface, usually by manual operation, can also be used pneumatic or electric equipment. Polishing is similar to grinding, the difference is the use of abrasive thickness, the smaller the number, the finer the size; the larger the number, the greater the intensity. Polishing, generally use the mill, first use 800#~1000# sandpaper to bright stars, then use 1500# sandpaper light scrub mark. Whether manual or electric grinding in grinding, the grinding process is always grinding dust, the dust particle size is very small, easily suspended in the air, if inhaled into human body will greatly damage the health. The utility model relates to a dust cleaning work table, which is an industrial environmental protection device which integrates a work table and a dust remover. Under the precondition of not interfering with the daily work of the workers, the dust removing worktable can effectively capture the suspended fine dust. Moreover, the dust removing worktable can be connected with a special smoke purifier to achieve a higher dust removal effect and provide a clean and healthy working environment for workers.
Structural characteristics:
A guide plate 1, exhaust table at the inlet, to prevent the impact of dust filter directly, thereby prolonging the life of filter.
2, the use of efficient centrifugal fan fan, with high efficiency, stable operation, etc..
3, in order to prevent noise pollution, to reduce the noise of the fan