Product introduction
With the continuous expansion of the scale of welding production, a large number of welding material consumption, labor hygiene and environmental protection of welding production is also on the agenda. In the past, our country has not paid enough attention to the environmental protection and sanitary problems of welding. Therefore, it is imperative to make the welding process from dirty, boring and dangerous work into green environmental protection.
Suitable for carbon dioxide protection welding, MAG welding, carbon arc air gouging welding, gas cutting, special welding, etc.
Working principle
Negative pressure smoke produced by the blower by suction hood smoke inhalation, enters the cavity through the flexible suction arm, the slower the dust particle diameter falling down, air containing fine dust into the clean indoor dust, filtration and separation in purification by separation of the cartridge chamber, dust filter is blocked in the on the surface, the purified air through the fan discharge, when the smoke is blocked in the filter surface deposition, timing opening pulse cleaning system, manual cleaning type should be removed for manual cleaning cartridge. Regular cleaning of the electrode plate.
Product structure and technical data structure
1, the welding fume purifier is composed of a centrifugal fan, a filter cartridge filter chamber, an electrostatic plate type purification tank, a dust collecting drawer, a purifier chamber body, a pulse ash cleaning or manual cleaning, an electric control device and a flexible suction arm with a dust suction hood.
2, the welding fume purifier uses the filter cartridge filter, the filter area is large, the unit area filtration flow rate is low, thus has the very high filtration efficiency.
3, the optimal design of the welding smoke purifier, the use of air flow into the flow control technology to solve the general bag filter to avoid the phenomenon of uneven flow in the room.
4, the welding fume purifier air flow organization design is reasonable, the resistance loss is small, the machine appearance is small, the movement is flexible, the operation is simple, the maintenance is convenient.
5, the filter cartridge adopts imported high efficiency filter material, the filter efficiency of 99.5% filter cartridge life expectancy than ordinary filter material in normal use conditions to be much longer.
6, in the high efficiency filter before the use of air flow guide plate, so that the life of the filter cartridge greatly extended.
7, the welding smoke purifier suction arm can be configured to rotate 360 degrees, and can move up and down, left and right
Safety code
1 all personnel in the use of the machine before, must first accept the operation training.
2 before repair, remember to unplug the power plug or cut off the power supply.
3 in case of accident, the power plug must be pulled out or cut off.
4 all maintenance work shall be carried out by qualified electricians or technicians.
5 in any case, the machine should be stored in dry room, avoid rain, clean the machine when using dry cloth