Application scope
Portable welding smoke purifier for purifying smoke and dust generated in welding, cutting, polishing, grinding and other processes of rare metals and precious materials recycling, small metal particles can purify a large amount of suspended harmful to the human body in the air. The utility model has the advantages of high purification efficiency, low noise, flexible use, small occupation area, etc.. The utility model is suitable for the working places of producing flue gas, such as arc welding, carbon dioxide protection welding, MAG welding, carbon arc air gouging welding, gas cutting and welding, etc..
Working principle
1 work in the dust suction hood by inhalation of smoke purifier, first through the first layer of fire purifier, separation of particles can be produced on the Mars interception large granular and polished, preliminary filtered air enters into the second layer filter protection plate, plate on the door to prevent the residual shunt and Mars directly into the main. After the distribution of dust filter; the gas enters the third storey main filter for the ultimate purification, the main filtering effect of the filter element is as high as 99.9%, due to the high efficiency of filtering accuracy of the main filter can reach indoor emission standards, filtered clean air directly into the indoor air outlet is circulated through the purifier.
2 mobile welding smoke purifier configuration two suction arm, the bottom is equipped with 2 directional, 2 universal casters with polyurethane brake device, used for welding mobile station. The suction arm can be 360 degrees of freedom rotation stops, by pulling the hood on the handle, can be flexible with the intention of the operator to position and dust suction angle, and in the absence of external force to the air; the optional 2m, 3M flexible suction arm; suction hose with high temperature resistant, flame retardant, wear resistant composite real the material, not because Mars wear after cracking, longer service life; for the 160mm. arm tube diameter
Welding fume purifier equipment advantage
1, a dedicated fan and motor is adopted to prevent overload circuit for preventing motor burn, high safety, stable performance.
2, filter cartridge imported materials (optional), long service life, can absorb 0.3 m dust particles, wet and sticky dust has a very good filtering effect, filtration efficiency of up to 99.9%.
3, the use of the 360 degree of freedom of the universal movement of the arm, smoke can be generated from the flue gas absorption, greatly improving the collection rate of dust, to ensure the health of workers.
4, welding smoke purifier for internal fire hazards and large particles slag using three protective measure, the longer service life, more safe and reliable purifier.
5, clean air from the grille exhaust direction uniform guidance and dispersion, thus reducing the noise to a minimum.
6, a special new Korean with brake caster, convenient equipment and free mobile positioning.
7, welding fume purifier supplies stable performance, easy replacement.
parameter
Model: SYD-HJ (Z) 1500/2400/3600
Handling air volume: 1500/2400/3600
Power: 1.5kw/2.2kw/3.0kw
Filtration area: 12 square /16 flat
Ash cleaning method: manual ash cleaning / automatic blowback
Filter effect: 99.97%
Dimensions: 650*650*1210/700*700*1260/750*750*128