DBY stainless steel electric diaphragm pump is a new type of chemical pumps, in recent years, due to a breakthrough in the membrane material, more and more international industrialized countries adopt this type of pump, replace part of centrifugal pump, screw pump, used in petrochemical, ceramics, metallurgy and other industries.
DBY-P stainless steel electric diaphragm pump product features:
A, QBY stainless steel electric diaphragm pump without irrigation water, self-priming capacity of more than 3 meters.
Two, through the good performance, diameter of 10 mm below the particles, mud, etc. can be easily passed.
Three, due to the diaphragm will be transmitted media and transmission mechanical parts separately, so the media will not leak out. And the pump itself, no seal, greatly prolong the service life of. According to different media, the diaphragm is divided into chloroprene rubber, fluorine rubber, NBR, etc., can meet the requirements of different users.
Four, electric diaphragm pump body flow through the part of the media, according to user requirements, can be divided into cast iron, aluminum alloy, stainless steel, lining rubber, fluorine lining, the motor is divided into ordinary type and explosion-proof type two.
Note the use of DBY-P - stainless steel electric diaphragm pump:
1, to ensure that the fluid contained in the largest particles do not exceed the maximum safety of the pump through the particle diameter standards.
2, the electrostatic spark may cause explosion caused personal injury and loss of property, according to the need to use a large enough area of the wire, the ground screw on the pump properly reliable grounding.
3, grounding requirements in accordance with the requirements of local laws and regulations and the provisions of some special requirements.
4, fastening the pump and the connecting pipe joints, to prevent vibration, impact, rub the production of electrostatic sparks. Antistatic hose.
5, to periodically check and test the reliability of grounding system, grounding resistance of less than 100 ohms.
6, maintain good exhaust and ventilation, away from flammable and explosive and heat source.
7. When transporting flammable and toxic fluids, please place the exhaust port to a safe place away from the work area.
8, please use at least 3/8 "inner diameter of the smooth pipe connected to the exhaust port and muffler.
9, the fluid pressure can cause serious casualties and property losses, do not pump pressure when any maintenance work of the pump and tube system, such as the need to do maintenance, the first cut off the pump inlet, pressure piping system pressure relief relief mechanism to open the bypass, the pipe joints slowly release the connection.
10, such as the transmission of harmful toxic fluid, please do not pump directly to the manufacturer to repair. Properly handled in accordance with local laws and regulations, and use the AUFINE company to ensure the life of pure accessories.
11, part of the use of liquid delivery Aluminum Alloy material pump, please do not used to transport liquid containing Fe3+ and halogenated hydrocarbons and other halogenated hydrocarbon solvents, the pump will cause corrosion caused by burst.
12, to ensure that all contact parts of the body will not be transported fluid corrosion damage.
13, to ensure that all operators are familiar with the operation of the use and control of the safety of the use of the pump precautions, if necessary, the necessary supplies of supplies.
14, the correct use of the pump, does not allow a long period of air transport.
15, at work where the poor, such as construction sites, industrial wastewater discharge, due to impurities in the water and are complicated, easy to plug the pipeline, so the electric pump on the formation of excessive load, the electrical heating vulnerability, spindle fracture