Water self cleaning sterilizer
A, product introduction
Shengyuan brand WTS-2 series water self-cleaning sterilizer is my company by the analysis of the market survey, widely, a new product developed by the Ministry of development, and carefully developed, it uses effective, economical and durable.
As the water tank and water tank water sometimes stays for a long time, resulting from various microorganisms and bacteria pollution, the water quality index of water is not up to the hygiene standards, two water pollution.
Long term storage of water does not cycle, due to environmental reasons, so that a large number of algae in the water. To eliminate the two pollution water tank and water tank, must be properly disinfected and regular cleaning of water, and now all kinds of complicated disinfection measures; high cost, sometimes even without water, causing some inconvenience to users. Shengyuan brand WTS-2 series tank the company developed a self-cleaning sterilizer by autologous circulating water, while adding strong oxidizing substances properly, can achieve the disinfection of water.
Two, the scope of application
The high water tank, storage tank, water tank, living sewage treatment plant clear water tank, fire water tank, water tank; aquaculture.
Three, product categories
1, water tank ozone self-cleaning sterilizer
2, water tank micro electrolysis self-cleaning sterilizer
Four, working principle
In the first part will be arranged in the water tank water circulation self-cleaning sterilizer, to ensure uniform water circulation water tank. When the water level reaches the high water level gauge set, the cabinet began to strong oxidizing gas starting high voltage power supply and the submersible pump generated by pipeline, to the aeration part; aeration disinfection of water, at the same time, submersible pumps will be sterilized water back to the water tank, the stagnant water circulation, and so on, for disinfection water thoroughly, to ensure water quality.
1, the principle of self cleaning sterilizer
Its working principle is that oxygen (or air) through high frequency and high voltage electric field, so that oxygen into ozone, and timely mixing with water, the use of strong oxidation of ozone to kill bacteria in water. The best concentration of bacteria can be achieved by changing the inlet pressure, air volume and current.
Due to the redox potential of ozone in the water was 2.07v, ratio of chlorine (1.36v), so the ozone amount is only 1/10000 of chlorine, the sterilization effect is 600-3000 times faster than chlorine and other chemicals can kill bacteria, the number of seconds.
2, the principle of micro electrolysis self-cleaning sterilizer
Water tank self-cleaning sterilizer by micro electrolysis principle, through electrochemical reaction, chlorine ions and water molecules dissolved in the water to produce the following oxidizing substances: hypochlorous acid (HCIO-), chlorine dioxide (CIO2), ozone (O3), reactive oxygen species (O), molecular chlorine (Cl2) etc.. The oxidizing substances by diffusion and circulation of water tank and a water pool in all water and water tank, the inner wall of the pool for processing, destruction of water and water tank, the inner wall of the pool of bacteria, algae, algae cells, disinfection effect. The best concentration of bacteria can be achieved by adjusting the influent flow rate and air volume.
Five, installation diagram
Figure 1 Figure 2
Built in self cleaning sterilizer for water tank external type water tank self-cleaning sterilizer
Installation sketch map
Figure 1:1- injection level gauge; 2- submersible pump submersible pump power line; 3- 4-; ozone inlet pipe; 5- water distributor; 6- circulation tank; 7- inlet pipe; 8- control cabinet.
Note: Figure 2 body size: 700 x 500 x 200mm; covering size: 1400 x 800 x 200mm; inlet diameter: 3/4 pipe diameter: 1/2 "away from the wall; size: 50mm; take over the position of the water outlet of the water tank, water tank, or from the bottom of the tank above 100~200mm.
Five, matters needing attention
1, the cabinet will be installed in a dry ventilated place, waterproof, waterproof measures.
2, will be placed in the auxiliary water tank or pool at the bottom of the middle, and connected with the suction pipe.
3, cable connection between auxiliary and control cabinet and pipelines.
4, the water tank or pool drain, drain end is connected with a main auxiliary power supply equipment to start work.
5, external equipment should be installed on the bottom of the tank, the tank should be higher than the lowest water intake pump equipment.
6, the main auxiliary equipment installation is expected from a distance of 10 meters, the standard installation.
Six, specification parameters
Model series applicable conditions
Power (W)
Power supply dimensions (mm)
The living water tank fire water tank device with *H energy release cycle can release energy for L*B*H
WTS-2 A 10-80 50-200 = 300 220V AC
50HZ 500*600 400*200*500
B = 10 = 50 = 250 500*600 400*200*50