Screw degassing decontamination device
Equipment introduction
The utility model relates to a screw degassing and decontamination device, which is a continuous and continuous work, and the utility model can be used to purify the air bubbles and impurities in the water system. As a result of this consolidation, all bubbles and the smallest impurities will be permanently removed, leaving the system free from bubbles and impurities. It is different from the traditional filter and the working way of the cleaner. Whether the device can be used in a heating system depends on different aspects. The dewatering and removing device must be installed on the main line and preferably the highest point of the system temperature. For the heating system, the best position is the outlet of the heating unit. For the refrigeration system, the highest temperature is on the return pipe of the refrigerating unit.
Working principle
The unique structure of the product is similar to the spiral degassing valve. Specially designed spiral pipe is located in the center of the spiral slag remover, it can produce a static area in the spiral slag remover, so that all the size of the particles have time to settle to the bottom of the device, collected to the sediment chamber. When the particles are separated from the system, the pressure drop of the spiral slag separator remains the same, so that no blockage occurs. When the system is in normal operation, the system can be used to remove the impurities. The device is equipped with a large impurity chamber, only regular sewage can be.     
Equipment characteristics
1 when the system is running, the dirt can be discharged without stopping the system. 2 remove all dirt without maintenance, do not install spare filters.
3 no bypass valve or isolation valve, the pressure drop is very small, does not impede the movement of fluid.
4 no matter big or small particles can be removed.
technical parameter
1 Effect of sand diameter: > 0.1mm; turbidity: = 10NTU; head loss: < 0.02Mpa;
2 influent water quality
The turbidity of raw water is not less than 300NTU; the water pressure is less than or equal to 0.25Mpa.  
Effect
Removal of air bubbles and air masses in the circulatory system;
The system greatly reduces the debugging time after the first water injection, no additional exhaust valve;
Dirt can be removed when the system is running;
Can be as small as 5 microns (=0.005MM) removal of dirt and impurities;
The lowest pressure drop ratio in similar products;
Does not cause unnecessary system downtime;
Widely used in different pressure, temperature and material;
Application scope
The utility model is mainly used for eliminating the underground water and the solid particles in the underground hot water and other water sources