Imported polyethersulfone microporous membrane folded filter and imported non-woven fabric or mesh support layer folding, filter outer barrel, core and end caps are polypropylene, each part is sealed by heat welding molding, without any adhesive, no pollution, no medium loss.
Product characteristics:
The membrane hydrophilicity, uniform pore size distribution, flux
It has a wide range of chemical compatibility and good acid and alkali resistance, temperature resistance, especially suitable for high temperature liquid filtration
The filter with FDA biological safety standards
The products have been manufactured before the completion of the 100% test, and the high pure water
Application field:
The pharmaceutical and biological products terminal filtration,
The drinking water, beverages, wine, ultrapure water terminal filter,
The chemical raw material filter
Main technical parameters:
Filtration accuracy
0.1 M, 0.22 m, 0.45 m, 0.65 m, 0.8 m, 1 m
Filter length
10 ", 20", "30", 40"
Filter area /10 "length
0.65m2 [10], 1.30m2 [20]], 1.95m2 [30], 2.60m2 [40]
test
The integrity test of each filter element
Maximum operating temperature
85 degrees C (pressure 0.2MPa)
Maximum working pressure
1.6MPa@25 C s.
Forward voltage difference
0.4MPa@25 C s.
Reverse voltage difference
0.3MPa@25 C s.
Steam sterilization
121 + 2 degrees C, 30min each time
Interface type
222 insert type, 226 card in type
O shape sealing ring material
Fluorosilicone rubber