Carbon steel stainless steel pressure tank, pressure tank, pressure tank use price pressure tank, equipped with automatic equipment, pressure up to 1 MPa, the material is divided into stainless steel and carbon steel, the size can be customized according to the customer, the customer can also be customized according to our drawings, drawings, to meet different customer needs is the stainless steel pressure tank by pressure tank the air in the tank compressibility to regulate and store water and keep the required pressure, so called pressure water supply equipment, which is equivalent to the water tower and pool. Because the water supply pressure is maintained by the compressed air in the tank, the installation height of the tank can not be limited.
Carbon steel pressure tank, stainless steel pressure tank, pressure tank, price pressure tank are generally installed between the water distribution pipe and the pipe network. When the water pump is started, the water supply is supplied to the pipe network, the excess water is stored in the tank, and the water level in the tank is raised, and the air in the tank is compressed, and the pressure is increased accordingly. When the pressure in the tank reaches the upper limit pressure value, the stainless steel pressure tank is connected with the top of the tank by the pipeline, and the indicator of the electric contact pressure meter connected with the upper limit contacts the upper limit contact, sends out a signal, cuts off the power supply and stops the pump. The user continues to use the water, the compressed air in the tank will enter the water pressure in the tank network, the water level will drop, and the air pressure in the tank will also decline. When required to limit pressure value, the electric contact pressure gauge is connected to the index limit contacts, relay, carbon steel stainless steel pressure tank, pressure tank, pressure tank, water pump and motor power on price to restart. Under normal circumstances, the pump can be in the case of unmanned control, and according to changes in water consumption, the number of pumps to adjust the number of stops and work hours, to ensure continuous water supply to the pipe network. There are two types of pressure tank: air supply type and diaphragm type. Direct contact with air and water pressure air tank, after a period of time, due to air leakage and dissolved in water is reduced, the stainless steel pressure regulating water content gradually decreased. Pump start gradually lead to complex, so the need for regular qi. The air supply methods include air compressor, air supply, water ejector, air supply, regular air release, air supply, etc.. The diaphragm type pressure tank is separated from the air and water, and the water is in the rubber (plastic) bag, and the gap between the outside and the tank body is filled with inert gas, which can be charged with nitrogen. The pressure tank has no problems of gas dissolving and water loss. The utility model can be inflated at one time and can be used for a long time without setting up an air compressor. Therefore, the investment is saved, the system is simplified and the range of application is enlarged