Structure characteristics:
SYD series mobile unit is composed of a box body, filter cartridge, ash storage box, fan, cleaning device controller, filter vertically installed, using heavy flow principle: the top air inlet, bottom exhaust, use force air to flow down, will be at the top of filter blowback to internal dust ash storage barrel;
• made of high quality cold rolled steel plate, beautiful and practical;
• the box structure is reasonable and compact;
• there is a dust deflector at the air inlet to protect the filter from large particle damage;
• the use of the sinking type principle design, into the wind at the end of the exhaust, easy to dust settlement;
• wide front door: easy and easy to check and change filter;
• high efficiency polyester coated filter cartridge with good ventilation and filtration accuracy of up to 99.9%. Meets the indoor emission requirements;
• four casters at the bottom, two of which are movable belt brake casters, easy to move and locate;
• filter cleaning method: manual vibration cleaning, automatic pulse cleaning can be selected;
Aluminum alloy fan impeller: large air flow, low noise, low energy consumption;
• external pointer pressure differential, can reflect the dust collector in a timely manner;
• suction hose is temperature resistant, flame retardant and wear resistant composite material, long service life;
• the built-in articulated suction arm can be rotated 360 degrees, and the suction hood can be easily and conveniently pulled to the desired position.
Mobile automatic reverse type welding fume purifier is suitable for arc welding, carbon dioxide protection welding, MAG welding, carbon arc gouging welding, gas melting cutting, special welding and so on. Through the fan gravity, suction inlet equipment by the universal dust shield welding smoke exhaust equipment, air inlet is provided with a flame arrester, the arrester is spark resistance, smoke gas enters the sedimentation chamber by gravity and upward airflow, the coarse dust particles directly to the ash bucket, dust filter is collected on the outside the surface of clean gas by filter and purified by the filter center into the clean room, clean air and activated carbon filter adsorption by further purification after standard discharge outlet. When the dust on the surface of the filter cylinder continuous deposition, filter cartridge the pressure increases, when the pressure reaches the pre-set value, the cartridge cleaning with compressed air pulse back blowing, blowing compressed air to the inner surface of the filter cartridge through the nozzle, when produced from the inside and outside reverse high pressure air flow. The cartridge sharp expansion and contraction caused by shock and vibration, the attachment of dust in the dust fall into the dust collecting groove surface of the filter cartridge.
This product uses the physical filtration work, the purification is high efficiency, the maintenance is convenient, the purification rate may achieve above 96%, achieves the environmental protection acceptance standard. The purifier is easy to use and is suitable for the smoke and dust of the welding machine in the mechanical processing plant, the automobile assembly plant and the maintenance factory. The inhaled welding fume can be discharged directly inside the room after purification and can help to keep the room closed and maintain room temperature in winter so as to facilitate operation. The monomer purifier adopts a movable structure and has better adaptability to the use environment. Equipped with high-performance worm gear fan, large suction capacity, low noise, excellent absorption stability