Hengshui embellish abundant gas equipment co., LTD

Member Level: Register Member
Enterprise Nature: Joint stock enterprise
Operation Mode: Fabricators
Location: Zaoqiang County hengshui city Hebei Province China
Authentication Information:

Product Details

Rizhao gas pressure regulating cabinet, produced by Feng Feng, national standard

Price 150000
Unit
Yield 50000/年
Place of Production 燃气调压柜
Product Category 石油化工类(换热器、容器、塔器等)
Delivery Time 15天

Product Detail Parameters

进口压力 0.4MPa

Product Description

Rizhao gas pressure regulating cabinet, embellish Feng manufacture, national standard quality
Other name: dual gas regulator box / parallel gas regulator box / dual gas regulator / parallel gas regulator / boiler dedicated dual gas regulator / box type gas pressure reducing device / gas valve group / gas reduction valve group
technical parameter
Inlet pressure range (upstream gas pressure) P1:0.4-0.015MPa
Outlet pressure range (downstream gas pressure, burner rating pressure) P2:1-100KPa
Flow range: 1500-3500m3/h structure form: 2+0 (double circuit). All the way pressure, all the way standby
Inlet side diameter: DN100, outlet side diameter: DN200
Import and export direction: horizontal direction (can be improved according to customer demand, such as: bottom, bottom, outlet)
The function of this gas pressure regulating cabinet
Filtration: filter accuracy: 10 m, equipped with differential pressure meter.
Voltage regulation: voltage regulator accuracy AC5 (national authorities detected)
Safety shut-off: shut-off valve action at excess of 1.5P2,
Safety release: over 1.3P2, release valve opens.
Applicable medium: methane, natural gas, coalbed methane, coal gas and other non corrosive gases.
The gas pressure regulating box is suitable for the industrial combustion system of methane tank decompression, medium-sized gas boiler, burner (10T-28T), resident users and large industrial users

Product Performance

5.1 安装前的要求
调压器、切断阀、安全阀及阀门安装前,应将工艺管道内的杂质(物)、碎屑等清除干净。调压器、切断阀、安全阀及阀门应测试合格。
5.2 工艺管道及设备连接
箱内工艺管道之间及与相关设备采用焊接或法兰连接[2],具体按GB l50—2011《压力容器》、GB50235—2010《工业金属管道工程施工规范》、GB50184—2011《工业金属管道工程施工质量验收规范》等执行。管件与阀门、调压器等直接连接时不得出现角焊缝。法兰间的密封垫片采用聚四氟乙烯垫片。
5.3 防静电及绝缘
箱体内各连接管段的法兰之间均应进行防静电连(跨)接,箱体槽钢(或工字钢)应与工艺管道进行防静电连接,箱体底部预留防静电接地接头。调压计量箱进出口管配置绝缘法兰或接头,其常态绝缘电阻>10MW。
联系方式:谭正180-0338-3735 可加微信随时报价 QQ:2894242950